Comunicaciones en Congresos/Papers in Conferences

 

XI Congreso Ibérico de Agroingeniería. 11 a 12 de noviembre de 2021. Palencia. SEAGING. ISBN: 978-84-16723-79-9

 

262) MADRID M.A., FUENTES, J. M., GALLEGO, E., AYUGA, F. (2021). Medidas del ángulo de reposo de pellets de biomasa

 

GEOKARLSRUHE 2021 Sustainable Earth – from processes to resources. 19–24 September 2021. Karlsruhe (Germany). DGGV Annual Meeting


261) HENAO CASAS, J. D.; FERNÁNDEZ ESCALANTE, A. E.; AYUGA, F. (2021). Managed aquifer recharge (MAR) as a tool to mitigate aquifer overexploitation: insights from los Arenales aquifer (Spain).

 

XVIII Congreso Colombiano de Geología. 18 AL 20 de agosto 2021. Medellín, Colombia. ISSN: 2805-7058


260) HENAO CASAS, J. D.; FERNÁNDEZ ESCALANTE, A. E.; AYUGA, F. (2021). La recarga gestionada de acuíferos como herramienta para mitigar su sobreexplotación: conclusiones del Acuífero de Los Arenales (España). 436

 

AgEng2021 conference. New Challenges for Agricultural Engineering towards a Digital World. 4 -8 July 2021, Évora (Portugal). EurAgEng. ISBN: 978-94-6343-891-9

259) AYUGA, F., GALLEGO, E., FUENTES, J. M. (2021). Novelties in the revised Eurocode 1991, part 4: actions on silos and tanks

 

INTED2020, International Technology, Education and Development Conference. 2 a 4 de marzo 2020,Valencia (Spain). IATED. ISBN: 978-84-09-17939-8

258) RAMÍREZ-GÓMEZ, A., AYUGA TÉLLEZ, E., GARCÍA-GARCÍA, A. I., FUENTES, J. M., AYUGA, F. (2020). ECOLAB-UPM and ecodesign thinking. Pp. 6056-6056

 

X Congreso Ibérico de Agroingeniería. 3 a 6 de septiembre de 2019. HUESCA. SEAGING. ISBN: 978-84-16723-79-9

257) SÁNCHEZ-CRESPO, F. A., GÓMEZ-VILLARINO, M. T., AYUGA, F., GARCÍA A. I. (2019). Interferometría diferencial como herramienta para el estudio localizado de la erosión por escorrentía. Pp. 595-605

256) GALLEGO, E., FUENTES, J. M., SADOWSKI, A., AYUGA, F. (2019). Presiones normales sobre tolvas oblicuas en silos de acero. Pp. 149-156

255) GALLEGO, E., FUENTES, J. M., AYUGA, F. (2019). Estudio del comportamiento de silos de chapa corrugada mediante modelos de elementos discretos. Pp. 127-134

 

10º Congreso Internacional de Recarga Gestionada de Acuíferos (ISMAR10). 20 – 24 May, 2019 Madrid (Spain). IGME, IWRA, IAH, UNESCO, ASCE

254) FERNÁNDEZ ESCALANTE, E.; GARCÍA ASENSIO, J. M.; AYUGA, F.; ROJAS VEGA, C.; GUERRERO SALAZAR, P., SAN SEBASTIÁN SAUTO, J. (2019). Ancient techniques of Managed Aquifer Recharge: Spanish Careos and Peruvian Amunas as an Adaptive Complex System. Breakdown, pathology and comparative analysis

 

 V Congreso Edificios Energía Casi Nula (EECN).  28th of November, 2018. Madrid (Spain), ISBN: 978-17-28-82171-9

 253) López F., Ayuga F., Juncá J. A., Soriano M., García Sanz J. (2018).  Edificios de energía casi nula utilizando recursos de generación distribuida (solar, eólica y biomasa) y microredes inteligentes. Pp. 139-144

 

 ICERI2018, 11th annual International Conference of Education, Research and Innovation. 12th – 14th of November, 2018. Sevilla (Spain), ISBN: 978-84-09-05948-5

 252) AYUGA F., GARCÍA A. I., FUENTES J. M.,  GALLEGO E., RAMÍREZ-GÓMEZ A., GÓMEZ-VILLARINO M.T., CABALLOL D. (2018). BIM as a tool to develop collaborative capacities in Master´s students. Pp. 4724-4728

 

CHoPS2018, 9th  International Conference on Conveying and Handling of Particulate Solids . 10-12 September 2018, Greenwich (UK).

251) AGUADO P., TASCÓN A., RAMÍREZ-GÓMEZ A., AYUGA, F., (2018). Pressure measurements in an 18.5 m3 silo for dust explosions

 

AgEng2014. 8 -12 July 2018, Wageningen (the Netherlands) . EurAgEng. ISBN: 978-94-6343-891-9

 250) SÁNCHEZ-CRESPO F., GALLEGO E., FUENTES J. M., AYUGA F., GARCÍA  A. I. (2018). Differential Interferometry as a Tool for Localized Study of Runoff Erosion

249) GALLEGO E., SADOWSKI, A., FUENTES J. M., AYUGA F. (2017). Wall Pressures on Oblique Hoppers of Steel Silos.

248) BRIZ, T., AYUGA, F., GARCÍA, A. I., SREDNICKA-TOBER, D., REMBIALKOWSKA, E. (2018). Innovative Education Towards Sustainable Food Systems: Preliminary Results From Spain

 

IX Congreso Ibérico de Agroingeniería. 4 a 6 de septiembre de 2017. Braganza (Portugal). SEAGING. ISBN:

247) FUENTES J. M., GARCÍA A. I., GALLEGO E., AYUGA F. (2017). Uso del vídeo divulgativo como herramienta de aprendizaje en estudios de Ingeniería Agraria

246) SÁNCHEZ-CRESPO F., AYUGA F., GARCÍA  A. I. (2017). Interferometría como herramienta para el estudio localizado de la erosión por escorrentía.

 

Congreso de Ingeniería Rural. Madrid (Spain). 16 a 17 de enero de 2017. ISBN: 978-84-697-9636-8

245) AYUGA F., GALLEGO E., FUENTES J. M., RAMÍREZ-GÓMEZ Á., SÁNCHEZ DE MEDINA Á., GÓNZALEZ-MONTELLANO C., BRAVO A. (2017). La modelización con elementos discretos para el estudio mecánico de sólidos en problemas de ingeniería rural. Pp. 23-33

244) GALLEGO E., MOYA M., GARCÍA A. I., AYUGA-TELLEZ E., AYUGA F. (2017). La evolución del cálculo de firmes en caminos rurales. Pp. 43-55

243) SÁNCHEZ-CRESPO F., AYUGA F., GARCÍA  A. I. (2017). Interferometría como herramienta para el estudio localizado de erosión por escorrentía superficial. Pp. 205-215

242) FUENTES J. M.; GARCÍA A. I.; AYUGA F. (2017). Las construcciones rurales tradicionales. Técnicas para su estudio y posibilidades de reutilización. Pp. 167-179

241)  AGUADO P., AYUGA F., TASCÓN A., RUIZ A., RAMÍREZ-GÓMEZ A., FERNÁNDEZ J. (2017). La protección frente a explosiones de polvo en silos agrícolas. Pp. 33-41

 

III Congreso Internacional sobre “Universidad y Discapacidad”. CIUD. Madrid, Spain. November 10-11, 2016.

 240) JUNCÀ J. A., LÓPEZ F., AYUGA F., ESTEBAN M. (2016). El Ciclo de Sesiones sobre Ingeniería y Accesibilidad como vínculo de la Universidad con la formación en accesibilidad

 

International Conference of Agricultural Engineering CIGR-AgEng2014. Aarhus, Denmark. June 26-30, 2016. CIGR, EurAgEng. ISBN:

 239) GALLEGO E., RUIZ-ALTISENT M, MEJÍA C., CORREA E. C., GARCÍA J. L., FUENTES J. M., AYUGA, F. (2016). A proposal for a new Biosystems Engineering degree at the Technical University of Madrid-UPM

238) GALLEGO E., FUENTES J. M., NAVARRO C., AYUGA F. (2016). Design of non-structured roofs for steel silos by numerical methods. Comparison of FE and 3D-beam models

237) BRAVO A., SÁNCHEZ-MEDINA A., AYUGA F. (2016). Experimental bench to analyse the incipient motion of spherical bed particles in an open channel

 

Ciclo de Sesiones “Ingeniería y Accesibilidad”, La ingeniería al servicio de la sociedad. October, 20, 2015, Madrid (Spain)

 236) AYUGA, F. (2015). La Ingeniería al servicio de la población más vulnerable.

 

Measuring agriculture and rural planning with advanced methods. August 31- October 9, 2015, Milan (Italy).

235) AYUGA, F. (2015). Evolution of the Agricultural Engineering studies to cover new challenges and needs

 

ASABE 2015 Annual International Meeting. July 26-29, 2015, New Orleans (USA). ASABE. ISBN: 9781510810501

 234) CURRAN, T. P., GREEN, A. R., GENTILE, F., KROMETIS, L., AYUGA F. (2015). International Peer Assessment of Student Project Videos

 

VIII Congreso Ibérico de Agroingeniería. 1 a 3 de junio de 2015. Orihuela. SEAGING. ISBN:

 233) AGUADO. P. J.; TASCÓN, A., RAMÍREZ, A., AYUGA, F. (2015). Relación entre las diferentes presiones medidas en distintas partes de un silo de 18,5 m3 en ensayos de explosiones de almidón de maíz

232) GALLEGO, E.; MOYA, M., AYUGA, F. (2015). Cálculo de espesores de firme en caminos rurales

231) RODRÍGUEZ, A.; MOYA, M., VILLAR, J.R., AYUGA, F. (2015). Aplicación de una metodología de inspección de obras de paso en una red de caminos rurales de Extremadura

230) GÓMEZ, J.; TASCÓN, A.; ALTUZARRA, A.; AYUGA, F. (2015). Estudio de las variables de diseño en bodegas de Rioja

 

INTED2015 9th International Technology, Education and Development Conference. 2-4, March 2015. Madrid, ISBN: 978-84-606-5763-7

 229) GARCÍA, A. I.,  FUENTES, J. M., RAMÍREZ-GÓMEZ, A., AGUADO, P., AYUGA F. (2015). Divulgative technical videos by university students as a process for the acquisition of cross-curricular skills in the context of EHEA degrees

 

ASABE and CSBE/SCGAB 2014 Annual International Meeting. July 13-16, 2014 Montreal, Quebec (Canada). CSBE/ASABE. ISBN:

228) CURRAN, T. P., GATES, R. S., GENTILE, F., SCOTT, D., AYUGA, F., BRIASSOULIS, D., ZHANG, C. (2014). International student collaboration in Biosystems Engineering using video podcasts in design classes.

 

International Conference of Agricultural Engineering AgEng2014. Zurich, Swiss Confederation. July 6-10, 2014. EurAgEng. ISBN: 978-0-9930236-0-6

227) MOYA, M., RODRIGUEZ, A., VILLAR, J. R., AYUGA F. (2014). Inspection methodology for culverts in a rural road network of Extremadura (Spain).

226) CURRAN, T. P., GATES, R. S., GENTILE, F., SCOTT, D., AYUGA, F., BRIASSOULIS, D., ZHANG, C. (2014). Using video podcasts to enhance international student collaboration in Biosystems Engineering

225) TASCÓN, A., RAMÍREZ-GÓMEZ, A., AGUADO, P., AYUGA, F. (2014). Vented dust explosions in a modular test silo.

 

ANQUE-ICCE-BIOTEC-2014. Satellite event: II International Symposium on Handling and Hazards of Materials in Industry (HANHAZ2014). Madrid, 1-4 July. ANQUE. ISBN

 224) GALLEGO, E., FUENTES, J. M., RAMÍREZ-GÓMEZ Á., GONZÁLEZ-MONTELLANO, C., PORRAS, C. J., AYUGA, F. (2014). Test recommendations for validation of numerical models in the design of agricultural steel silo roofs

223) RAMÍREZ-GÓMEZ, Á., FUENTES-PARDO, J. M., GALLEGO, E., LARA, P., AYUGA, F. (2014). Pressure distributions in tall formworks.

 

INTED2014 8th International Technology, Education and Development Conference. 10-12, March 2014. Valencia, ISBN: 978-84-616-8412-0

 222) FUENTES-PARDO, J. M., GARCIA, A. I., RAMÍREZ-GÓMEZ Á., AYUGA, F. (2014). Computer-based tools for the assessment of learning processes in higher education: a comparative analysis. Pp, 976-984

221) RAMÍREZ-GÓMEZ Á., AYUGA E., FUENTES-PARDO  J.M, AYUGA F. (2014). Application of social networks in higher education. Pp., 2963-2968

 

VII Congreso Ibérico de Agroingeniería y de Ciencias Hortícolas. 26 a 29 de agosto de 2013. Madrid. SEAGING y SECH. ISBN: 978-84-695-9055-3

220) RAMÍREZ-GÓMEZ, Á., GALLEGO, E., FUENTES, J. M., GONZÁLEZ-MONTELLANO, C., PORRAS, C. J., AYUGA, F. (2013). Ensayo para calcular tensiones y deformaciones en la estructura del techo de un silo metálico de 18, 34 m de diámetro

219) RODRÍGUEZ, A., MOYA, M., AYUGA, F. (2013). Metodología para la Gestión de Obras de Paso en una Red de Caminos Rurales de Extremadura.

218) NAVARRO, C., GALLEGO, E., FUENTES, J. M., AYUGA, F. (2013). Determinación de un método simplificado para el diseño de anillos de viento en silos metálicos

217) LÓPEZ, M., FUENTES, J. M., GARCIA, A. I., AYUGA, F. (2013). La conservación del patrimonio agroindustrial. Propuestas para la reutilización de los antiguos mataderos municipales y análisis de costes

216) GUAYA, P. M. M., GARCIA, A. I., AYUGA-TELLEZ, E., AYUGA, F. (2013) Validación de modelos de predicción de caudales mensuales para cuencas no aforadas en Ecuador

 

ASABE 2013 Annual International Meeting. July 21-24, 2013 Kansas City, Misuri (USA). ASABE. ISBN: 9781627486651

215) AYUGA, F., FUENTES J. M.,  RAMÍREZ-GÓMEZ, A., GARCÍA A. I., AGUADO P. J. (2013). A comparative analysis of ABE Bachelor of Science programs in European and US Universities

214) GONZÁLEZ-MONTELLANO C., GALLEGO E., RAMÍREZ-GÓMEZ Á., FUENTES J. M, AYUGA F. (2013). Discrete Element analysis of the discharge of biomass briquettes stored in bins.

 

PARTEC 2013. International Congress on Particle Technology. Nuremberg, Germany 23-25, April 2013

213) GONZÁLEZ-MONTELLANO C., GALLEGO E., RAMÍREZ-GÓMEZ Á., FUENTES J. M, AYUGA F. (2013). Discharge rate of elongated particles stored in silos and hoppers: discrete element analysis

 

IX Jornadas sobre Docencia e Investigación en Ingeniería Agroforestal. León. 12-15 de septiembre de 2012.

 212) AGUADO, P; AYUGA, F; BRIASSOULIS, D; PANAGAKIS, P; FEBO P; COMPARETTI, A; SARCASIA-MUGNOZZA, G; O´DONNELL, C; NAVICKAS, K; FEHRMANN, J. (2012). La Transición de la Ingeniería Agraria a la Ingeniería de Biosistemas en Europa.

 

CHoPS 2012 7th International Conference for Conveying and Handling of Particulate Solids. 10-13 September 2012. Friedrichshafen (Germany).

 211) GONZÁLEZ-MONTELLANO C., RAMÍREZ-GÓMEZ Á., FUENTES J.M, AYUGA F. (2012). Numerical effects on DEM-predicted silo wall pressures derived from the use of different filling procedures.

 

ASABE 2012 Annual International Meeting. July 29-August 1, 2012 Dallas, Texas (USA). ASABE.

 210) AYUGA F., HOLDEN, N. M. (2012). Development of an International ‘Innovation and Entrepreneurship’ Course for Biosystems Engineering

 

International Conference of Agricultural Engineering CIGR-AgEng2012. Valencia, Spain. July 8-12, 2012. CIGR, EurAgEng, SEAgIng. ISBN: 978-84-615-9928-8

 209) GONZALEZ-MONTELLANO C., RAMIREZ-GÓMEZ A., FUENTES J. M., GALLEGO E., AYUGA F. (2012). Determination of the mechanical properties of biomass pellets for use in DEM simulations

208) GONZALEZ-MONTELLANO C., GALLEGO E., RAMIREZ-GÓMEZ A., FUENTES J. M., AYUGA F. (2012). A study on the discharge rate of pellets stored in silos: discrete element analysis.

207) FUENTES J. M., GARCÍA, A. I., GONZALEZ-MONTELLANO C., GALLEGO E., AYUGA F. (2012). Reuse of vacant agro-industrial buildings. The case of the public slaughterhouses in Spain

206) RAMIREZ-GÓMEZ A., TASCÓN, A., AGUADO, P., AYUGA F. (2012).  Test silo for dust explosions

205) DÍAZ-PALACIOS S., AYUGA, F., GARCÍA, A. I. (2012). Space-time analysis of the urban-rural gradient in the metropolitan area of Madrid and its surroundings (Guadalajara and Toledo)

 

ICCE-ANQUE-2012. National Symposium on Handling and Hazards of Materials in Industry (HANHAZ2012). Sevilla 24-27 June. ANQUE. ISBN 9788469535363

 204) RAMÍREZ-GÓMEZ Á., GONZÁLEZ-MONTELLANO C., PORRAS-PRIETO C.J., FUENTES J.M., GALLEGO E., AYUGA  F., VILLODAS S. (2012) R&D on Structural Design of Steel Silo Roofs for High Snow Load Conditions

203) RAMÍREZ-GÓMEZ Á., TASCÓN A., GARCÍA-TORRENT J., VEGA A., AGUADO P., AYUGA F. (2012). Design of an experimental silo for dust explosions.

202) GONZALEZ-MONTELLANO C., RAMIREZ-GÓMEZ A., FUENTES J. M., GALLEGO E., AYUGA F. (2012). Analysis of the numerical results obtained in a 3D discrete element model for simulating the filling and emptying of a small silo.

201) GONZALEZ-MONTELLANO C., RAMIREZ-GÓMEZ A., FUENTES J. M., GALLEGO E., AYUGA F. (2012). Mechanical properties of biomass pellets for use in DEM simulations.

200) RAMIREZ-GÓMEZ A., GONZALEZ-MONTELLANO C., AYUGA F. (2012). Determination of particle-to-particle friction of agricultural materials stored in silos

199) GONZALEZ-MONTELLANO C., RAMIREZ-GÓMEZ A., FUENTES J. M., GALLEGO E., AYUGA F. (2012). 3D discrete element analysis of the discharge rate of pellets stored in silos

 

SEAg 2011 Conference. Queensland (Australia). 29-30 September 2011. Organiza Engineers Australia.

198) GONZALEZ-MONTELLANO C., RAMIREZ A., AYUGA F. (2011). Pressure and flow pattern predictions in a 3D silo model – DE analysis.

 

8th European Congress of Chemical Engineering. Berlin (Germany). 25-29 September 2011. Organiza European Federation of Chemical Engineers

197) GONZALEZ-MONTELLANO C., RAMIREZ A., AYUGA F. (2011). Experimental validation of a 3D discrete element model for silos

                                                                                                      

VI Congreso Ibérico de AgroIngeniería. Évora, Portugal. 5 – 7 Septiembre  2011. Organiza Sociedad Española de Agroingeniería. ISBN: 978-972-778-113-3

 196) AYUGA, F. (2011). Perspectivas de los métodos numéricos como herramientas de cálculo y análisis estructural en la Construcción Rural.

195) RAMÍREZ, Á.; FERNÁNDEZ-LLANA, D.; GONZÁLEZ-MONTELLANO, C.; MOYA, M.; AYUGA F. (2011). Determinación del coeficiente de rozamiento grano-pared en silos de pared corrugada mediante el método de los elementos discretos.

194) RAMÍREZ, Á.; TASCÓN, A.; GARCÍA-TORRENT, J.; VEGA, Á.; AGUADO, P.; AYUGA F. (2011). Diseño de silo experimental para el estudio de sistemas de protección frente a las explosiones de polvo.

193) FUENTES, J. M.; GARCÍA, A. I.; AYUGA F. (2011). Los mataderos municipales en España: Un patrimonio agroindustrial a reutilizar.

 

ASABE Annual International Meeting. Louisville, Kentucky (USA). 7-10 August, 2011. Organiza ASABE. ISBN: 9781618391568

 192) GONZALEZ-MONTELLANO, C.; FERNANDEZ- LLANA, D.; FUENTES, J. M.; AYUGA F. (2011). Determination of the Mechanical Properties of Corn Grains and Olive Fruits Required in DEM Simulations.

 

9th International Conference on Education and Information Systems, Technologies and Applications: EISTA 2011. Orlando, Florida (USA). 19-22 July, 2011. Organiza: International Institute of Informatics and Systemics (IIIS). ISBN-13: 978-1-936338-33-7.

191) AGUADO, P. J.; MARTÍN, S.; MARTÍNEZ BLANCO, A.; MONTERO, M. J.; RAMÍREZ-GÓMEZ, A.; ROJAS, J. I.; RUBIO, A.; SÁNCHEZ DE MEDINA, A.; TÉVAR, G.; AYUGA-TÉLLEZ, E.; AYUGA, F.; FUENTES, J. M.; GARCÍA, A. I.; GONZÁLEZ-GARCÍA, C.; GRANDE-ORTIZ, M. A.; HERNÁNDEZ, J.; MARTÍN, A. J. (2011). Analysis of the Information Presented in the Website to Doctoral Degrees.

190) AGUADO, P.; FEHRMANN, J.; AYUGA, F.; BRIASSOULIS, D.; PANAGAKIS, P.; FEBO, P.; COMPARETTI, A.; SCARASCIA-MUGNOZZA, G.; O’DONNELL, C.; NAVICKAS, K. (2011). The Transition from Agricultural to Biosystems Engineering University Studies in Europe. Pp. 1-7

189) FUENTES, J. M.; RAMÍREZ, A.; GARCÍA, A. I.; AYUGA, F. (2011). Use of Virtual Learning Environments (VLE) in Spanish Universities: Current State and Comparison of e-Learning Tools. Pp. 21-27

 

118th ASEE Annual Conference &. Exposition. Vancouver (Canada). 26-29 Junio 2011. Organiza American Society for Engineering Education.

 188) WOLFE, M. L.; HOLDEN, N. M.; BRIASSOULIS, D.; AYUGA, F.; SCARASCIA-MUGNOZZA, G. (2011). Trans-Atlantic Biosystems Engineering Curriculum and Mobility (TABE.NET). Pp. 1364-1368

 

VI Workshop of the Thematic Network “Education and Research in Biosystems or Agricultural and Biological Engineering in Europe; (ERABEE-TN)”. Clermont-Ferrand (France).  9-10 septiembre 2010. Organiza TN-ERABEE. ISBN: 978-960-6806-14-8

187) AYUGA F., AGUADO, P. (2010). Enhancing the attractiveness of Spanish study programs in Biosystems Engineering. Pp. 137-143

 

AgEng 2010. International Conference on Agricultural Engineering. Clermont-Ferrand (France). 6-8 septiembre 2010. Organiza EurAgEng. ISBN 13: 978 2 85362 684 2

 186) AYUGA-TELLEZ E., GONZALEZ C., GRANDE-ORTIZ A., FUENTES J. M., RAMIREZ A., AYUGA F. (2010). Postgraduate studies in Biosystems Engineering to acquire a doctor degree in Spain. Pp. 295

185) FUENTES J. M., GARCIA A. I., AYUGA F.  (2010). Methodological approach to the study and reuse of old traditional agricultural buildings. Pp. 333

184) GONZALEZ-MONTELLANO C., RAMIREZ A., GALLEGO E., FUENTES J. M., AYUGA F. (2010). Discrete element’s capability of predicting material behaviour in a 3-D scale silo with a hopper at its base. Pp. 339

 

ASABE Annual International Meeting.  Pittsburgh, Pennsylvania (USA), June 20 – June 23, 2010. Organiza ASABE. ISBN: 978-1-61738-835-4

183) GALLEGO E., AYUGA E., GONZÁLEZ-MONTELLANO C., GARCÍA A. I., AYUGA F. (2010). Repair Costs of Low Volume Roads in Spain

182) GONZÁLEZ-MONTELLANO C., RAMÍREZ A., GALLEGO E., FUENTES J. M., AYUGA F. (2010). Discrete Element modeling of a 3D scale Silo with Hopper

 

V Workshop of the Thematic Network “Education and Research in Biosystems or Agricultural and Biological Engineering in Europe; (ERABEE-TN)”. Prague 29-30 April 2010. Organiza TN-ERABEE. ISBN: 987-960-6806-13-1

 181) AYUGA F., AGUADO, P. (2010). Quality assurance and assessment frameworks of Biosystems engineering studies in Spain. Pp. 154-163

 

APLU-ICA Conference 2010. Doctoral and postdoctoral professional development in Agricultural and Life Sciences. Gent (Belgium). 7-9 April 2010. Organizan APLU e ICA.

 180) AYUGA F., BRIASSOULIS D., AGUADO P., FARKAS I., GRIEPENTROG H., LORENCOWICZ E. (2010). Third Cycle University studies in Europe in the field of Agricultural Engineering and in the emerging discipline of Biosystems Engineering.

 

IV Workshop of the Thematic Network “Education and Research in Biosystems or Agricultural and Biological Engineering in Europe; (ERABEE-TN)”. Malta, 16-17 noviembre 2009. Organiza TN-ERABEE. ISBN: 978-960-6806-12-4

 179) AYUGA F. (2009).Synopsis of the research activities in the first two cycles of European Biosystems Engineering University studies and rare knowledge. Pp. 14-28

178) AYUGA F., AGUADO, P. (2009). Research activities in the first two cycles of Spanish Biosystems Engineering University studies. Pp. 155-162

 

International Conference of Education, Research and Innovation (ICERI 2009) Madrid (Spain) 16-18 November, 2009. Organiza IATED (International Association of Technology, Education and Development). ISBN: 978-84-613-2953-3, ISBN CD: 978-84-613-2955-7

177) AYUGA F., BRIASSOULIS D., AGUADO P., FARKAS I., GRIEPENTROG H., LORENCOWICZ E. (2009).  Third cycle studies on the new emerging discipline “Biosystems Engineering” in Europe, an ERABEE Thematic Network survey.

 

Symposium of the IASS 2009. Evolution and trends in design, analysis and construction of shell and spatial structures. Valencia, 28 September- 2 October 2009. Organiza IASS (International Association for Shell and Spatial Structures). ISBN: 978 84 8363 459 2,  ISBN CD: 978 84 8363 461 5

176) AYUGA F., GONZALEZ C., GALLEGO E., FUENTES J.M., RAMIREZ A. (2009) Influence of patch-load on metal silos with corrugated walls. Pp. 66-67

 

V Congreso Nacional y II Congreso Ibérico de Agroingeniería 2009. Lugo, 28-30 de septiembre de 2009. Organiza la Sociedad Española de Agroingeniería. ISBN: 978 84 692 5560 5

175) MONTERO M.J., CANO S., GASCÓ G., GALLEGO E., RAMÍREZ, A., GARCÍA A.I., AYUGA F. (2009). Utilización de escorias de incineradoras en  ejecución y reparación de caminos rurales. Pp. 161-162

174) RAMIREZ A., GONZALEZ C., GALLEGO E., AYUGA F. (2009). Imperfecciones locales en silos. Análisis mediante el método de los elementos discretos. Pp. 23-24

173) RODRÍGUEZ S., AYUGA F., FUENTES J.M., GALLEGO E. (2009). Evolución de los Silos Agrícolas de la Red Nacional Española. PP. 13-14

172) FUENTES J.M., GARCÍA A. I., GALLEGO E., AYUGA F. (2009). Reutilización de construcciones agrarias sin uso. Pp. 11-12

 

6th International Conference for Conveying and Handling of Particulate Solids (CHoPS) and 10th International Conference on Bulk Materials Storage, Handling and Transportation (ICBMH). Brisbane, Australia. 3rd – 7th August 2009. Organiza University of Wollongong, Australia

171) GALLEGO E., GONZALEZ C., RAMIREZ A., AYUGA F. (2009). The Effect of Patch-Load on Stress Components of Corrugated Silo Walls

170) GONZALEZ C., AYUGA F., OOI J. (2009). Discrete Element Modeling of Grain Flow in a Planar Silo: Influence of Simulation Parameters

 

ASABE Annual International Meeting.  Reno  (Nevada, Estados Unidos de América), 21 a 24 de junio de 2009. Organiza ASABE. ISBN: 978 16 156 7362 9 Curran Associates, Inc.

169) MONTERO M.J., CANO S., GALLEGO E., GARCÍA A.I., AYUGA F. (2009). The use of waste materials in the repair and construction of low volume roads.

168) FUENTES J.M., GALLEGO E., RAMIREZ A., GONZALEZ C., MONTERO M.J., AYUGA F. (2009). Computational methods for the design of formworks used in rural works

 

III Workshop of the Thematic Network “Education and Research in Biosystems or Agricultural and Biological Engineering in Europe; (ERABEE-TN)”. Upssala, 4 a 5 de mayo de 2009. Organiza TN-ERABEE. ISBN: 978-960-6806-11-7

 167) AYUGA F., BRIASSOULIS D., AGUADO, P. FARKAS I., GRIEPENTROG H., LORENCOWICZ E.(2009). Synopsis of the 3rd ERABEE workshop on “Third cycle University studies in Europe: current schemes and possible structured programs of studies in the emerging discipline of Biosystems Engineering”. Pp. 17-29

166) AYUGA F., AGUADO, P. (2009). Present situation and future of the 3rd cycle studies in Agricultural Engineering and in Biosystems Engineering in Spain. Pp. 183-191

 

INTED2009. International Technology, Education and Development Conference. Valencia 9-11 de marzo de 2009. Organiza IATED. ISBN: 978-84-612-7578-6

165) GARCÍA A. I., AYUGA F., FUENTES J. M., GALLEGO E., RAMÍREZ A. (2009). The evolution of the technical project as the final work in the Spanish Agricultural Engineering studies

 

IV Congreso Mundial de Ingenieros Agrónomos y Profesionales de la Agronomía. Madrid 28 a 30 de octubre 2008. Organiza Asociación Mundial de Ingenieros Agrónomos (AMIA)

164) AYUGA F. (2008). El patrimonio rural construido: Conservación y uso sostenible.

 

II Workshop of the Thematic Network “Education and Research in Biosystems or Agricultural and Biological Engineering in Europe; (ERABEE-TN)”. Dublín, 13 a 14 de octubre de 2008. Organiza TN-ERABEE. ISBN: 978-960-6806-07-0

163) AYUGA F., AGUADO, P. (2008). Bio-fuels, bio-materials and quality of products in the Biosystems Engineering and Agricultural Engineering Studies in Spain. Pp. 143-148

 

X Jornadas Internacionales de Patrimonio Industrial. Gijón 1-4 de octubre 2008. Organiza INCUNA.

 162) FUENTES J. M.; AYUGA F.; GARCÍA A. I. (2008). Pasado y presente de las bodegas subterráneas tradicionales

161) AYUGA F.; GONZALO, J. M.; FUENTES J. M.; GARCÍA A. I. (2008). Las primeras fábricas de harina industriales españolas. Tipología y características constructivas

160) GARCÍA A. I.; FUENTES J. M.; AYUGA F. (2008). Reutilización de edificios agroindustriales abandonados

 

36th Solid Mechanics Conference. Gdansk (Poland). 9-12 septiembre 2008. Organiza Polish Academy of Sciences. ISBN:  978-83-89687-35-7

 159) GONZÁLEZ C.; GALLEGO E.; MORÁN, J.; AYUGA F. (2008).The effect of patch load on corrugated silo walls. Pp. 338-339

 

Structures and Granular Solids. From scientific Principles to Engineering Applications. Edinburgh. (UK). 1-2 de Julio de 2008. Organiza Royal Society of Edinburgh.

 158) GONZÁLEZ C.; RAMÍREZ A.; AYUGA F. (2008). Influence of buckling consideration in steel silo costs.

 

AgEng 2008. International Conference on Agricultural Engineering. Crete (Grecia). 23-25 de junio de 2008. Organiza EurAgEng.

 157) PANAGAKIS, P.; BRIASSOULIS, D.; NIKOPOULOS, E.; DOUZALS, J. P.; SCARASCIA-MUGNOZZA, G.; FEBO, P.; COMPARETTI, A.; FEHRMANN, J.; AYUGA, F.; MOSTAGHIMI, S.; WOLFE, M. L.; RISKOWSKI, G.; TING, K. C.;  KANWAR, R.  (2008). Policy Oriented Measures in Support of the Evolving Biosystems Engineering Studies in USA – EU

156) GALLEGO, E.; VIDAL, P.; AYUGA F. (2008). Analysis of pressures in hoppers with finite element models.

155)  RAMÍREZ, A.; NIELSEN J., AYUGA F. (2008). Influence of the hopper eccentricity of silos in pressure distributions.

154) GALLEGO, E.; FUENTES, J. M.; RAMÍREZ A.; AYUGA F. (2008). Design of formworks with two-dimensional and three-dimensional finite element models.

153) MONTERO M. J., RAMÍREZ A., GARCÍA A. I., AYUGA. F. (2008). The use of waste materials in rural road construction and maintenance.

152) GONZÁLEZ, C.;  FERNANDEZ, M. S., RAMÍREZ, A.; AYUGA F. (2008). Influence of the stored material and the geometry on circular steel silo design

 

II Jornadas de Investigación en Construcción. Madrid 22 a 24 de mayo de 2008. Organiza Instituto “Eduardo Torroja” de Ciencias de la Construcción. . ISBN: 978-84-7292-367-6

151) FUENTES, J. M.; GALLEGO, E.; RAMÍREZ GÓMEZ, A.; AYUGA, F. (2008). Aplicación del método de los elementos finitos al cálculo de encofrados.

150) MONTERO, M. J.; CANO, S.; CALERO, R. ; GONZÁLEZ MONTELLANO, C.; RAMÍREZ GÓMEZ, A.; FUENTES PARDO, J.M.; AYUGA, E.; GARCÍA GARCÍA, A.I.; AYUGA, F. (2008). Utilización de residuos de demolición y construcción en la ejecución y reparación de caminos rurales

 

I Workshop of the Thematic Network “Education and Research in Biosystems or Agricultural and Biological Engineering in Europe; (ERABEE-TN)”. Madrid, 2 a 4 de abril de 2008. Organiza TN-ERABEE. ISBN: 978-960-6806-04-9

149) AYUGA, F; AGUADO, P. (2008). The future of Biosystems Engineering in Spain. Pp. 125-129

 

INTED2008. International Technology, Education and Development Conference. Valencia 3-4 de marzo de 2008. Organiza IATED. ISBN: 978-84-612-0190-7

 148) BRIASSOULIS, D.; PANAGAKIS, P.; NIKOPOULOS, E.; AYUGA, F. (2008). The emerging evolution from Agricultural Engineering to Biosystems Engineering studies in Europe

 

9th International Conference on Bulk Materials Storage, Handling and Transportation ICBMH 2007. Newcastle (Australia) 9 a 11 de octubre de 2007. Organiza The University of Newcastle. ISBN: 0-85825-846-3

 147) RAMÍREZ, A.; EINAV I.; ANSOURIAN P.; AYUGA F.; RASMUSSEN K. (2007). Influence of local imperfections in silo pressure measurements – DEM analysis

 

XI Congreso Internacional de Ingeniería de Proyectos. Lugo, 26 a 28 de septiembre de 2007. Organiza AEIPRO. ISBN: 978-84-690-8134-1

 146) GARCÍA, A. I.; AYUGA, F.;  TRUEBA, I. (2007). La infraestructura de transporte rural, motor del cambio en pequeñas comunidades subdesarrolladas. P. 194

 

The Biennal Conference of the Australian Society for Engineering in Agriculture. SEAg 07. Adelaide (Australia), 23 a 26 de septiembre de 2007

 145) RAMÍREZ, A.; EINAV I.; ANSOURIAN P.; AYUGA F.; RASMUSSEN K. (2007). Granular effects arising from mounted Pressure Cells in silo walls – DEM analyses. Pp. 298-304

 

IV Congreso Nacional y I Congreso Ibérico de Agroingeniería 2007. Albacete, 4-6 de septiembre de 2007. Organiza la Sociedad Española de Agroingeniería. ISBN: 978 84 690 7894 5

 144) FUENTES, J. M.; GALLEGO, E.; RAMÍREZ, A., AYUGA, F. (2007).Cálculo de encofrados por el método de los elementos finitos. Pp. 204-205

143) RAMÍREZ, A.; NIELSEN J.; AYUGA, F; MUNCH-ANDERSEN, J. (2007). Influencia de la excentricidad de la tolva de los silos en la distribución de presiones. Pp. 179-180

142) GONZÁLEZ, C.; FERNÁNDEZ, M. S.; AYUGA, F. (2007). Influencia de la geometría y el material almacenado en el coste de fabricación de silos cilíndricos metálicos diseñados mediante la aplicación de los Eurocódigos. Pp. 176-178

141) MONTERO, M. J.; GARCÍA, A. I.; AYUGA, F. (2007). Utilización de materiales residuales en la construcción y estabilización de caminos rurales. Pp. 173-175

 

I Workshop of POMSEBES “Policy oriented measures in support of the evolving Biosystems Engineering Studies in EU-USA. Minneapolis (USA) 14 a 15 de junio de 2007. ISBN: 978-960-89313-8-1

 140) AYUGA, F.; KANWAR, R.; RAMON, H. (2007). Identify current/future employers. Pp 26-61.

Jornada sobre el Nuevo Código Técnico de la Edificación en la Agroingeniería. Valencia, 9 de mayo de 2007. Organiza Sociedad Española de Agroingeniería.

139) VIDAL , P.; AYUGA , F.; GALLEGO, E.; RUIZ, M. A.;  FERNÁNDEZ, M. S. (2007). Aplicación del CTE en el cálculo de naves agroindustriales: influencia en el dimensionado respecto de la normas NBE.

138) AYUGA, F. (2007). Necesidad de créditos europeos para la enseñanza del Código Técnico de la Edificación en la Ingeniería Agroforestal.

 

INTED2007 International Technology, Education and Development Conference. Valencia 7 a 9 de marzo de 2007. Organiza International Association for Technology, Education and Development. ISBN: 84-611-4516-X

137) AYUGA, F.; BRIASSOULIS, D. (2007). The thematic network USAEE (university studies of agricultural engineering in Europe), its objectives and consequences

 

VI Jornadas sobre la Actividad Docente e Investigadora en Ingeniería Agroforestal. Palencia, 21 a 22 de septiembre de 2006. Organiza Universidad de Valladolid.

 136) AYUGA, F. (2006). La red temática USAEE (University Studies of Agricultural Engineering in Europe) sus objetivos y consecuencias en el Área de la Ingeniería Agroforestal.

 

VIII Workshop of the Thematic Network “University Studies of Agricultural Engineering in Europe (USAEE)”. Bonn, 6 a 9 de septiembre de 2006. Organiza TN-USAEE.

135) AYUGA, F. (2006). Tools for quality assurance and assessment of agricultural engineering programmes, tuning subject-area lines and disappearing rare knowledge in Spain.

 

5th International Conference for Conveying and Handling of Particulate Solids. Sorrento (Italia), 27 a 31 de agosto de 2006. Organiza International Scientific Council (ISC).

134) RAMIREZ, A.; NIELSEN, J.; AYUGA, F.; MUNCH-ANDERSEN J. (2006). Pressure measurements in full-scale steel silos with eccentric hoppers.

 

ASABE Annual International Meeting. Portland (Estados Unidos de América), 9 a 12 de julio de 2006. Organiza ASABE. ISBN: 978 16 156 7083 3. Curran Associates Inc.

 133) AYUGA, F.; AGUADO, P. J.; GALLEGO, E.; RAMÍREZ, A. (2006). Experimental Tests to Validate Numerical Models in Silos Design.

 

I Congreso de Medioambiente en Carreteras. Santander 25 a 28 de abril. Organiza Asociación Española de Carreteras.

 132) RAMÍREZ A.; GALLEGO, E.; AYUGA, E.; GARCÍA, A. I.; AYUGA, F. (2006). Identificación de los atributos significativos del paisaje español atravesado por vías de transporte.

 

5th World Congress on Particle Technology 2006. Orlando (USA) 23-27 de Abril 2006. Organiza American Institute of Chemical Engineers. ISBN 0-8169-1005-7

 131) RAMÍREZ, A.; NIELSEN, J.; AYUGA, F.; MUNCH-ANDERSEN, J. (2006). On the Use of Plate-Type Normal Pressure Cells for Silos

130) RAMÍREZ, A.; NIELSEN, J.; AYUGA, F.; MUNCH-ANDERSEN, J. (2006) Pressure Measurements in Full-Scale Steel Silos.

 

International Seminar on Maintenance of rural roads, stakes and perspectives. Rabat (Marruecos) 20-21 Abril 2006. Organizan PIARC y CIGR.

129) GALLEGO, E.; AYUGA, F.; DAL-RE, R.; MOYA, M. (2006). The evolution of the Rural Road network in Spain during the 20th Century

 

VII Workshop of the Thematic Network “University Studies of Agricultural Engineering in Europe (USAEE)”. Vilnius 1 a 2 de abril de 2006. Organiza TN-USAEE. ISBN 960-89313-0-4

128) AYUGA, F. (2006). Restructuring agricultural engineering studies and employability in Spain. 118-125

 

III Congreso Nacional de Agroingeniería 2005. León 21-24 de septiembre de 2005. Organiza la Sociedad Española de Agroingeniería. ISBN: 84-9773-208-1

 127) RAMÍREZ A.; GALLEGO, E.; AYUGA, F.; GARCÍA, A. I. (2005). Valoración de la integración paisajística del sistema viario rural español. 371-373

126) GALLEGO, E.; MOYA, M.; CANO, S.; AYUGA, F. (2005). Mecanismos para la evaluación y gestión del sistema viario rural en España. 282-284

125) GALLEGO, E.; RAMÍREZ A.; MARTÍNEZ, V.; AYUGA, F. (2005). Estado de conservación del sistema viario rural en España. 280-282

124) RAMÍREZ A.; MOYA, M.; AYUGA, F. (2005). Propiedades mecánicas de harinas y azúcar granular para su utilización en el diseño de silos. 257-259

123) RAMÍREZ A.; GALLEGO, E.; AYUGA, F.; AYUGA, E. (2005). Determinación de presiones en las paredes de silos experimentales a escala real. 255-257

122) GALLEGO, E.; VIDAL, P.; AYUGA, F.  (2005). Estudios del proceso de llenado de silos mediante modelos en tres dimensiones por el método de los elementos finitos. 247-249

 

VI Workshop of the Thematic Network “University Studies of Agricultural Engineering in Europe (USAEE)”. Budapest 17 a 20 de septiembre de 2005. Organiza TN-USAEE.

121) AYUGA, F. (2005). Agricultural Engineering Studies meeting the FEANI and EurAgEng criteria in Spain

 

Powders & Grains 2005. Stuttgart, Alemania. 18 al 22 de Julio de 2005. Organiza Universidad de Stuttgart. ISBN: 04-153834-8-X

 120) ROMBACH, G. A.; AYUGA F.; NEUMANN F.; GALLEGO E. (2005). Modelling of granular flow in silos based on finite element method ANSYS vs. SILO. Pp. 469-473

 

International Colloquium, Quality Agriculture: Historical Heritage And Environmental Resources For The Integrated Development of Territories. Italia, 4 al 9 de julio 2005. Organiza IGU – International Geographical Union, Commission on Sustainability of Rural Systems.

 119) AYUGA F., GARCIA A. I., RAMÍREZ A., GARCÍA J. M. (2005). Rural landscape assessment and changes after human intervention.

 

I Jornadas de Investigación en Construcción. Madrid 2 al 4 de junio de 2005. Organiza Instituto de Ciencias de la Construcción “Eduardo Torroja” del CSIC. ISBN: 84-931709-4-1

118) AYUGA, F.; GARCÍA, A. I.; GARCÍA MORUNO, L.; HERNÁNDEZ BLANCO, J. (2005). Estudio de los elementos constructivos de los nuevos edificios rurales para mejorar su integración en el paisaje. Tomo II, pp. 1033-1041

117) AYUGA, F.; GALLEGO, E.; RAMÍREZ, A.; VIDAL, P.; MOYA, M.; GUAITA, M.; AGUADO, P. J.; COUTO, A.; MORÁN, J. M.; JUAN, A.  (2005). Comportamiento estructural de silos agrícolas. Tomo II, pp. 975 -985

 

V Workshop of the Thematic Network “University Studies of Agricultural Engineering in Europe (USAEE)”. Dresden 8 a 10 de abril de 2005. Organiza TN-USAEE. ISBN: 960-92379-4-0

 116) AYUGA, F., RUIZ-ALTISENT, M. (2005). Quality assurance for university studies in Spain. Pp. 188-192

 

XXV Semana de la carretera y VI Encuentro Nacional de la carretera. Palma de Mallorca 25 a 29 de octubre  de 2004. Organiza Asociación Española de la Carretera. ISBN: 84-89875-48-0

 115) GALLEGO, E.; RAMÍREZ, A.; AYUGA, F.; SEGURA, J. (2004). Desarrollo de procedimientos de gestión del sistema viario rural en España. Pp. 321-332

114) RAMÍREZ, A.; GALLEGO, E.; AYUGA, F. (2004). Metodología para la valoración paisajística del entorno atravesado por vías de transporte. P. 535-546

 

CIGR International Conference. Beijing (China). 11 a 14 de octubre de  2004. Organiza CIGR.

 113) GALLEGO E.; MOYA, M.; PEREZ-GORDO, J.; AYUGA, F. (2004). Development of Rural Road Management and Maintenance Systems in Spain

 

IV Workshop of the Thematic Network “University Studies of Agricultural Engineering in Europe (USAEE)”. Leuven 16 a 18 de septiembre de 2004. Organiza TN-USAEE. ISBN: 960-92379-3-2

112) AYUGA, F., RUIZ-ALTISENT, M., GARCÍA, A. I. (2004). Agricultural Sciences Core Curricula in Spain. Pp  145-157.

 

AgEng 2004. International Conference on Agricultural Engineering. Leuven (Bélgica). 12-16 de septiembre de 2004. Organiza EurAgEng. ISBN: 90-76019-258

111) RAMÍREZ, A.; AYUGA, F.; GALLEGO, E. (2004). Tests in full-scale silos for the understanding of the interaction between the silo wall and the stored material. P. 620

110) VIDAL, P.; COUTO, A.; AYUGA, F.; GUAITA, M. (2004) Eccentric discharge: f.e.m. model and comparation with the Eurocode 1.  P.634

109) VIDAL, P.; COUTO, A.; AYUGA, F.; GUAITA, M. (2004) Pressures in agricultural cylindrical silos with, eccentric hopper and rigid wall. P. 624

 

ASAE/CSAE Annual International Meeting. Ottawa (Canadá), 1 a 4 de agosto de 2004. Organiza ASAE

108) GALLEGO E.; MOYA, M.; PEREZ-GORDO, J.; AYUGA, F. (2004). Development of a survey method to establish the conservation state of rural roads in Spain

107) VIDAL, P.; GUAITA, M.; AYUGA, F. (2004). Parametric study of the pressures of cylindrical silos with rigid wall.

106) VIDAL, P.; GUAITA, M.; AYUGA, F. (2004). Simulation of discharging processes in silos.

105) GALLEGO, E.; GOODEY, R.J.; AYUGA, F.; BROWN, C.J. (2004). Some practical features in modelling silos with finite elements.

104) RAMIREZ, A.; MOYA, M.; AYUGA, F. (2004). Determination of mechanical properties of agricultural powder materials and sugar to be used in silos design

EM 2004 17th  ASCE Engineering Mechanics Division Conference. Delaware, 13 a 16 de junio de 2002. Organiza American Society of Civil Engineering (ASCE).

103) VIDAL, P.; GUAITA, M.; AYUGA, F. (2004). Finite Element simulation of a cylindrical silo discharge: influence of dilatancy and wall flexibility

102) VIDAL, P.; GUAITA, M.; AYUGA, F.; COUTO, A. (2004). Discharge pressures in Cylindrical Silos With Eccentric Outlet Hopper Using F.E.M. Models

 

VI Congresso de Métodos Computacionais em Engenharia. LNEC, 31 Mayo a  2 Junio 2004. Lisboa. Organiza APMTAC Y SEMNI.

 101) VIDAL, P.; GUAITA, M.; AYUGA, F.; COUTO, A. (2004). Generación de un modelo de elementos finitos para la simulación del vaciado de silos con tolva excéntrica

 

New Trends in Farm Buildings. Évora. 2 a 6 de mayo de 2004. Organiza 2nd  Technical Section of the CIGR.

 100) AYUGA, F. , GARCÍA, A. I., GARCÍA MORUNO, L.; HERNÁNDEZ BLANCO, J. (2004). How to change new rural building elements to improve landscape integration. P. 14

 

III Workshop of the Thematic Network “University Studies of Agricultural Engineering in Europe (USAEE)”. Dijon 26 a 28 de marzo de 2004. Organiza TN-USAEE. ISBN: 960-92379-2-4.

 99)  AYUGA, F. , GARCÍA, A. I. (2004). The ECTS system in Spain. Pp. 135-135

 

II Workshop of the Thematic Network “University Studies of Agricultural Engineering in Europe (USAEE)”. Palermo.  26 a 30 de septiembre de 2003. Organiza TN-USAEE. ISBN: 960-92379-1-6

 98)  AYUGA, F. (2003). Agricultural engineering research in Spanish universities. Pp. 109-112

 

II Congreso Nacional de Agroingeniería 2003. Córdoba 24-27 de septiembre de 2003. Organiza la Sociedad Española de Agroingeniería.

97) AYUGA, F., GUAITA, M., AGUADO, P. J. (2003). El nuevo Código Técnico de la Edificación en las obras de Ingeniería Agraria. P. 335

96) AYUGA, F., SALVADOR, A. (2003). Recuperación de Edificios Rurales Abandonados. P. 391

95) MOYA, M., AYUGA, F., GUAITA, M., AGUADO, P. J. (2003). Propiedades físicas de diversos granos agrícolas necesarias para el cálculo de silos por métodos numéricos. P. 373

94) GALLEGO, E., MOYA, M., CANO, S., SEGURA, J., AYUGA, F. (2003). Estado actual de la gestión del sistema viario rural. P. 359

93) AYUGA, F., GUAITA, M., AGUADO, P. J. (2003). El nuevo Eurocódigo 1991 parte 4 de cálculo de acciones en silos. P. 333

92) REGOYOS, M., GARCÍA, A. I., AYUGA, F.; MARTÍNEZ, V. (2003). Evaluación del modelo de estimación de la erosión hídrica GEOWEPP, como instrumento de apoyo en la toma de decisiones políticas. P. 409

 

XIII ADM-XV INGEGRAF International Conference on tools and methods evolution in engineering design. Nápoles 4-6 de Junio de 2003. Organiza Ingegraf.

91) HERNÁNDEZ, J., GARCÍA, L.; AYUGA, F. (2003). New computer software based on GIS for landscape planning analysis. Pp. 181

 

III Workshop “De Ruralibus locis” 2003. The Preservation of Rural Architecture in the Productivity System Evolution. Florencia 16-18 de mayo. Organizan RURALIA y ACCADEMIA DEI GEORGOFILI. ISBN: 88-89028-02-5

 90) AYUGA, F.; SALVADOR, A.; GARCÍA, A. I. (2003). The reuse of redundant buildings: a tool for landscape protection. Pp. 119-129

 

I Workshop of the Thematic Network “University Studies of Agricultural Engineering in Europe (USAEE)”. Madrid 26 a 30 de marzo. Organiza TN-USAEE. ISBN: 960-92379-0-8.

 89) AYUGA, F (2003). University Studies in Agricultural Engineering in Spain.  Pp. 141-146

 

VI Congreso Nacional de Medio Ambiente. Madrid 25 al 29 de noviembre de 2002. Organiza Colegio Oficial de Físicos, Instituto de la Ingeniería de España. ISBN: 84-87338-07-0

 88) REGOYOS, M.; GARCÍA, A. I.; AYUGA, F.; MARTÍNEZ ÁLVAREZ, V. (2002). “Validación del modelo de estimación de la erosión “WEPP” como herramienta para la evaluación de estrategias de gestión y control de los recursos naturales”.

87) SALVADOR A.; AYUGA, F. (2002). “Reutilización de edificios rurales abandonados: una herramienta de sostenibilidad municipal”.

 

II Jornadas sobre Sistemas de Información Geográfica en Riesgos Geológicos y Medio Ambiente. Madrid 14 a 15 de noviembre de 2002. Organiza Instituto Geológico y Minero de España. ISBN: 84-7840-458-9

 86) GARCÍA A. I.; MARTÍNEZ ÁLVAREZ, V.; REGOYOS M.; AYUGA, F. (2002). “Simulación de eventos hidrológicos en pequeñas cuencas hidrográficas”. Pp. 65-84

 

VI Congreso Internacional de Ingeniería de Proyectos. Barcelona 23 a 25 de Octubre de 2002. Organiza AEIPRO. ISBN: 84-600-9800-1

 85) DE REGOYOS, M.; GARCÍA Y GARCÍA, A. I.; AYUGA. F.; MARTÍNEZ ÁLVAREZ, V. (2002). “Validación del modelo de estimación de la erosión “WEPP” como herramienta para la evaluación de estrategias de gestión y control de los recursos naturales a diferentes escalas de actuación”. P. 281

 84) SALVADOR, A.; HERNÁNDEZ BLANCO, J.; GARCÍA GARCÍA, A. I.; AYUGA, F. (2002). “Recuperación de edificios en el medio rural”. P. 201

 

AgEng 2002. International Conference on Agricultural Engineering. Budapest (Hungría). 1-5 de julio de 2002. Organiza EurAgEng. ISBN: 963-9058-0

83) MOYA, M.; AYUGA, F.; GUAITA, M.; AGUADO, P. (2002). “Determination of different parameters of granular agricultural materials considered in silos design”. Tomo II, p. 148

82) MORÁN, J. M.; AGUADO, P. J.; AYUGA, F.; GUERRA, M. I.; JUAN, A. (2002). “Study of static condition silos subjected to thermal effects. Comparative with Eurocode 1-4”. Tomo II, p.150

81) HERNÁNDEZ, J., GARCÍA, L.; AYUGA, F. (2002). “Integration methodologies for visual impact assessment of rural buildings by G.I.S.: the case of Castilla-León (Spain)”. Tomo II, p.156

80) MARTÍNEZ-ÁLVAREZ, V.; GARCÍA, A. I.; AYUGA, F. (2002). “Application of distributed routing techniques for studying the influence of excess rainfall intensity in small watersheds unit hydrographs”. Tomo II, p.279

 

XX Congreso Nacional de Riegos. Ciudad Real 12 a 14 de junio de 2002. Organiza AERYD.

79) MARTÍNEZ-ÁLVAREZ, V.; GARCÍA, A. I.; AYUGA, F. (2002). “Influencia de la intensidad de lluvia efectiva sobre los hidrogramas de avenida de pequeñas cuencas”.

 

XIV Congreso Internacional de Ingeniería Gráfica. Santander 5 a 7 de junio de 2002. Organiza INGEGRAF. ISBN 84-699-8559-0

78) GARCÍA, L.; HERNÁNDEZ, J.; AYUGA, F. (2002). “Diseño infográfico del exterior de edificaciones agroindustriales para su reutilización e integración en el paisaje”.

77) HERNÁNDEZ, J.; GARCÍA, L.; AYUGA, F. (2002). “Modelado y análisis de relaciones visuales de una construcción y su entorno mediante un programa informático implementado sobre S.I.G.” . Pp. 720-730

 

V Congreso de Métodos Numéricos en la Ingeniería. Madrid, 3 a 6 de Junio de 2002. Organizan SEMNI y APMTAC. ISBN: 84-95999-03-X

76) HERRÁEZ, L.; AYUGA, F.; GUAITA, M.; AGUADO, P. (2002) “Estudio de las influencias hídricas en las acciones del terreno sobre estructuras de contención, mediante el empleo del M.E.F.”. P. 254

 

EM 2002 15th  ASCE Engineering Mechanics Division Conference. New York, 2 a 5 de junio de 2002. Organiza American Society of Civil Engineering (ASCE).

75) MORÁN, J; AGUADO, P.; AYUGA, F.; JUAN, A. (2002). “Effects of termal loads on agricultural silos”. P. 36

74) MOYA, M.; AYUGA, F.; GUAITA, M.; AGUADO P. (2002). “Mechanical properties of granular agricultural materials considered in silos design”. P. 88

 

5th IFSA European Symposium on Farming and Rural Systems Research and Extension. Florencia, Italia. 8 al 11 de abril de 2002. Organiza International Farming Systems Association (IFSA).

73) HERNÁNDEZ, J.; GARCÍA, L.; AYUGA, F. (2002). ” A methodology for integration of rural buildings in the landscape: Localization study by geographic information systems”.

 

1ª Jornadas ACHE sobre la enseñanza del hormigón estructural. Madrid. 18-19 de octubre de 2001. Organiza Asociación Científico-técnica de Hormigón Estructural (ACHE). ISBN: 84-89670-25-0

72) AYUGA, F. (2001). “Enseñanza del cálculo de estructuras de hormigón adyacentes a estructuras granulares. El empleo de métodos numéricos”. Pp. 99-104.

 

AGROINGENIERÍA 2001. Valencia. 19-21 septiembre 2001. Organiza IVIA y UPV. ISBN: 84-482-2869-3

71) BERGANZA, B.; MARTÍNEZ-ÁLVAREZ, V.; AYUGA, F. (2001). “Aplicación del modelo hidrológico distribuido Topmodel en pequeñas cuencas agrícolas de climas áridos”. Vol. II. Pp. 135-141.

70) MOYA, M.; AYUGA, F.; GUAITA, M.; AGUADO P. (2001). “Determinación de las propiedades mecánicas de materiales agrícolas granulares necesarias para el cálculo de silos por métodos numéricos”. Vol. II. Pp. 333-339.

69) AYUGA, F.; AGUADO, P.; FERNÁNDEZ, J.; JUAN, A.; RUIZ, A. (2001). “Explosiones de polvo en silos agrícolas”. Vol. II. Pp. 255-261.

68) AYUGA, F. (2001). “Aproximación científica a la protección de los paisajes rurales”. Vol. II. Pp. 345-351.

67) AYUGA, F.; COUTO, A.; GUAITA, M.; AGUADO, P. (2001).”Simulación numérica de acciones estáticas sobre paredes de silos con tolva excéntrica”. Vol. II. Pp. 267-275.

66) GARCIA MORUNO, L; HERNÁNDEZ BLANCO, J.; AYUGA, F.; GARCIA NAVARRO, J. (2001). “Diseño e integración de las construcciones rurales en el paisaje: encuestas y conclusiones”. Vol. II. Pp. 351-357.

 

XVII Congreso Nacional de Ingeniería de Proyectos. Murcia. 19-21 septiembre 2001. Organiza AEIPRO. ISBN: 84-932146-0-4

65) BERGANZA, B.; MARTÍNEZ-ÁLVAREZ, V.; AYUGA, F.; GARCÍA, A. I. (2001). “Estimación de recursos hídricos superficiales en pequeñas cuencas no aforadas utilizando el modelo hidrológico “topmodel””. P. 209

64) GARCÍA, A. I.; AGUADO, P.;  AYUGA, F. (2001). “Asistencia para la toma de decisiones en la gestión del paisaje rural”. P. 203

63) AYUGA, F.; AGUADO, P.; FERNÁNDEZ, J.; JUAN, A. (2001). “Acciones en silos agrícolas. Las explosiones de polvo”. P. 152

 

XIV memorial CIGR World Congress 2000. Tsukuba (Japón). 28 noviembre-1 diciembre de 2000. Organiza CIGR.

62) MARTÍNEZ-ÁLVAREZ, V; GARCÍA, A. I.; AYUGA, F.; BERGANZA, B. (2000). “A distributed model for simulation small watershed runoff”. P. 33

 

Top Cart  2000. VII Congreso Nacional de Topografía y Cartografía. Madrid.16-20 de octubre de 2000. Organiza Col. Of. de Ing. Tec. En Topografía.

61) HERNÁNDEZ-BLANCO, J.; AYUGA, F.; GARCIA-NAVARRO, J.;GARCÍA-MORUNO, L. (2000). “Metodología para un análisis mediante S.I.G. de las localizaciones óptimas de las construcciones rurales en el paisaje”.

 

ECCOMAS 2000 European Congress on Computational Methods in Applied Sciences and Engineering. Barcelona. 11-14 de septiembre de 2000. Organiza SEMNI. ISBN: 84-89925-70-4

60) LÓPEZ, M. J.; COUTO, A.; GUAITA, M.; AYUGA, F.; CAÑAS, I. (2000). “Finite element methods for the evaluation of stresses under reinforced concrete footings”. Pp. 525

59) COUTO, A.; GUAITA, M.; AYUGA, F.; AGUADO, P.(2000). “Finite element methods for analysis of static pressure distributions in grain silos with eccentric outlets”. Pp. 533.

 

AgEng 2000 Agricultural Engineering into the third millenium. Warwick. (Inglaterra). 2-7 de julio de 2000. Organiza EurAgEng.

58) AYUGA, F.; GARCÍA, A. I.; CAÑAS, I.(2000). “Methodology for old rural building scientific research”. P. 187.

57) LÓPEZ, M. J.; COUTO, A.; GUAITA, M.; AYUGA, F. (2000). “Potential cost savings obtainable using contact pressure distribution under strip footing calculated by a F.E. model”. P. 195.

56) COUTO, A.; GUAITA, M.; AYUGA, F.;  AGUADO, P. (2000). “Numerical simulation of static pressures in silos with eccentric hoppers, rigid walls and elasto-plastic behavior of stored material”. P. 197.

 

EM 2000 XIV Engineering Mechanics Conference. Austin, Texas (Estados Unidos de América). 21 a 24 de mayo de 2000. Organiza ASCE.

55) COUTO, A.; GUAITA, M.; AYUGA, F.;  AGUADO, P. (2000). “Analysis of Static Pressures in Cylindrical Silos With Eccentric Outlet Hopper Using F.E.M. Models”.

54) AYUGA, F.;  AGUADO, P.; COUTO, A.; GUAITA, M. (2000). “Prediction of Silo Wall Pressures During Discharge Using Finite Element Models in Mass Flow and Funnel Flow”.

 

ASAE/CSAE Annual International Meeting. Toronto (Canadá). 18 a 22 de julio de 1999. Organiza ASAE

53) AGUADO, P.; AYUGA, F.; GUAITA, M.; GUTIÉRREZ, P.; MORÁN, J.; JUAN, A. (1999). “Predicting stress fields in agricultural silos during discharge”.

52) GARCÍA-MORUNO, L.; HERNÁNDEZ-BLANCO, J.; AYUGA, F.; GARCIA-NAVARRO, J.(1999). “Landscape integration of rural buildings: survey and conclusions”.

51) HERNÁNDEZ-BLANCO, J.; GARCÍA-MORUNO, L.; AYUGA, F.; GARCIA-NAVARRO, J. (1999). “Methodology for assessment of the visual impact of buildings in a GIS environment”.

50) MARTÍNEZ-ÁLVAREZ, V; HERNÁNDEZ-BLANCO, J.; GARCÍA, A. I.; AYUGA, F.; DAL-RÉ, R. (1999) “Hydrologic monitoring and development of distributed models in a GIS environment in order to evaluate surface runoff in ungaged rural watersheds”.

 

XV Congreso Nacional de Ingeniería de Proyectos. León 29 septiembre a 1 octubre 1999. Organiza AEIPRO. CD Rom ISBN: 84-89716-49-8 y abstracts ISBN: 84-89716-48-X

49) COUTO, A.; GUAITA, M.; LÓPEZ, M. J.; AGUADO, P.; AYUGA, F. (1999). “Análisis de la influencia de la modelización con diferentes elementos de contacto en la estimación de empujes en el cálculo de silos con el M.E.F.”. P. 112

48) AGUADO, P.; AYUGA, F.; GUAITA, M.; MORÁN, J.; JUAN, A.; COUTO, A.; (1999). “Limitaciones al Eurocódigo1, parte 4 en la determinación de las acciones de materiales agrícolas ensilados”. P. 113

47) MOYA, M.; AGUADO, P.; GUAITA, M.; AYUGA, F. (1999). “Determinación de los parámetros básicos de productos agrícolas almacenables para el diseño de silos”. P. 126

46) HERNÁNDEZ, J.; AYUGA, F.; GARCÍA, J.; GARCÍA, L. (1999). “Metodología para el análisis mediante S.I.G. de las localizaciones óptimas de las construcciones rurales en el paisaje”. P. 141

45) MARTÍNEZ, V.; DAL-RÉ, R.; GARCÍA, A. I.; AYUGA, F. (1999). “Superficies de fricción para el estudio de avenidas mediante modelos hidrológicos distribuidos”. P. 148

 

Jornadas Internacionales de Ingeniería Ambiental  99ICEE. Cartagena 9, 10 de septiembre 1999.Organiza Universidad Politécnica de Cartagena, Universidad de Murcia. ISBN: 84-83711060

44) MARTÍNEZ, V.; GARCÍA, A. I.; AYUGA, F. (1999). “La modelización distribuida de procesos hidrológicos y sus aplicaciones medioambientales”. Pp. 279-280.

 

IV Congreso Métodos Numéricos en Ingeniería. Sevilla (1999). Organiza SEMNI.

43) AGUADO, P. J.; AYUGA, F.; GUAITA, M.; LÓPEZ VILLAR, M. J. (1999).” Métodos de cálculo de sobrepresiones de vaciado en silos agrícolas mediante la técnica de los elementos finitos”. P. 52

 42) AYUGA, F.; GARCÍA-VAQUERO, E.; AGUADO, P. J.; GUAITA, M.; LÓPEZ VILLAR, M. J.. (1999). ” Determinación de las características de los materiales necesarias para el diseño de los silos agrícolas”. P. 49

 

International Conference on Quality Management and Availability of Data for Hydrology and Water Resources Management. Koblenz.  22-26 de marzo de 1999.  Organiza UNESCO, WMO, IAHS, EEA.

41) DAL-RÉ, R.; AYUGA, F; GARCÍA, A. I.; MARTÍNEZ, V. (1999).”Instrumental methods applied to the data acquisition in several small watersheds near Madrid in order to develop distributed hydrologic models for ungaged rural watersheds”. Pp. 59-62

 

IV Congreso Internacional de Ingeniería de Proyectos. Córdoba. 7 a 9 de octubre de 1998. Organizado por AEIPRO. ISBN: 84-600-9490-1

40) MARTÍNEZ, V.; GARCÍA, A. I.; DAL-RÉ, R.; AYUGA, F. (1998).”Modelos hidrológicos distribuidos para la determinación de la escorrentía superficial en pequeñas cuencas no aforadas”. P. 167

39) AGUADO, P.; AYUGA, F.; GUAITA, M. (1998) “Utilidad del  m.e.f. y del m.e.d. en el diseño de silos agrícolas”. P. 111

38) GARCÍA, L.; HERNÁNDEZ, J.; AYUGA, F.; GARCÍA, J. (1998). “Integración de las construcciones rurales en el paisaje: encuestas y conclusiones”. P. 155

37) HERNÁNDEZ, J.; AYUGA, F.; GARCIA, J.; GARCÍA, L. (1998). “Localizaciones óptimas para edificaciones agroindustriales mediante análisis del sistema territorial en los términos municipales de Villamañán y San Millán de los Caballeros (León)”. P. 156

 

International Conference on Agricultural Engineering AgEng98. Oslo. 24-27 de agosto de 1998. Organizado por EurAgEng.

36) DAL-RÉ, R.; AYUGA, F; GARCÍA, A. I.; MARTÍNEZ, V. (1998). “Hydrologic monitoring of several small rural watershed near Madrid in order to develop distributed hydrologic models for ungaged rural watershed in a GIS environment”

35) AYUGA, F.; GARCÍA, J. GARCÍA, L; HERNÁNDEZ, J. (1998). “Landscape integration of rural buildings: polls and conclusions”.

34) GARCÍA, L.; HERNÁNDEZ, J.; GARCÍA, J.; AYUGA, F. (1998). “Buildings environmental impact assessment: spatial localization”.

33) GARCÍA, L.; HERNÁNDEZ, J.; AYUGA, F.; GARCÍA, J.; CAÑAS, I. (1998). “Buildings environmental impact assessment: simulation of textures”.

32) AGUADO, P.; AYUGA, F.; GUAITA, M.; GUTIERREZ, P. (1998). “Predicting stress fields in agricultural silos during discharge”.

31) AGUADO, P.; GARCÍA-VAQUERO, E.; AYUGA, F.; GUAITA, M.(1998). “Physical properties used in predicting methods of stored agricultural materials pressures against the walls of silos”.

 

XIII International Congress on Agricultural Engineering. Rabat. 2 a 6 de febrero de 1998.  Organizado por la C.I.G.R. ISBN: 9981-1887-0-0

30) GARCÍA, L.; HERNÁNDEZ, J.; GARCÍA, J.; AYUGA, F.; CAÑAS, I. (1998). “Buildings environmental impact assessment: simulation of textures”.

29) AGUADO, P.; AYUGA, F.; GUAITA, M. (1998). “Finite element models for prediction of silo wall pressures during discharge”. Vol. 2. Pp. 141-148.

28) AYUGA, F.; GARCÍA-VAQUERO, E.; AGUADO, P.; GUAITA, M. (1998). “Test methods for determination of silage material parameters used in finite element models”. Vol. 2. Pp. 159-167.

 

XIII Congreso Nacional de Ingeniería de Proyectos. Sevilla. 5 a 7 de noviembre de 1997.  Organizado por AEIPRO. ISBN: 84-887-8330-2

27) AYUGA, F.; GARCÍA-VAQUERO, E.; AGUADO, P.; GUAITA, M. (1997)Determinación de las características de los materiales necesarias para el diseño de los silos agrícolas”. Vol. 1, pp. 29-37.

26) AGUADO, P.; AYUGA, F.; GUAITA, M. (1997)Métodos de cálculo de sobrepresiones de vaciado en silos agrícolas mediante la técnica de los elementos finitos. Vol. 1, pp. 43-53.

25) GARCÍA, J.; AYUGA, F.; CAÑAS, I.; GARCÍA, L.; HERNÁNDEZ, J. (1997) “Las nuevas construcciones ante la conservación del paisaje: un acercamiento a su estudio. Caso particular del páramo leonés”. Vol. 1, pp. 214-222.

24) GARCÍA, J.; AYUGA, F.; GARCÍA, L.; HERNÁNDEZ, J. (1997) “Variables representativas para un estudio de la localización de las construcciones rurales mediante sistemas de información geográfica.”. Vol. 1, pp.423-431.

23) GARCÍA, J.; AYUGA, F.; GARCÍA, L.; HERNÁNDEZ, J. (1997) “Estudio del impacto ambiental de las construcciones: localización espacial.”. Vol. 2, pp.681-687.

 

X Simposio de cooperativismo y desarrollo rural. Morillo de Tou (Huesca). Organizado por la Universidad de Zaragoza y la Asociación de Estudios Cooperativos. (1997).

22) AYUGA, F.; GARCÍA, J.; CAÑAS, I.; GARCÍA, L.; HERNÁNDEZ, J.(1997) “Las nuevas construcciones ante la conservación del paisaje tradicional: un acercamiento a su estudio en el Páramo Leonés”.

 

III Congreso de Métodos Numéricos en Ingeniería. Zaragoza. 3 a 6 de junio de 1996. Organiza SEMNI. ISBN: 84-878-6772-3

21) AYUGA, F.; GUAITA, M.; AGUADO, P. (1996)  “Influencia del tipo de pared en los empujes del material almacenado en silos agrícolas obtenidos por el método de los elementos finitos. Vol. 1, pp. 294-303.

20) GUAITA, M.; AYUGA, F. (1996). “Parámetros del material almacenado en los silos agrícolas que determinan la magnitud de los empujes obtenidos por el método de los elementos finitos”. Vol. 1, pp. 303-313.

 

International Conference on Agricultural Engineering. AgEng’96. Madrid. 23 a 26 de septiembre de 1996. Organiza EurAgEng.

19) GUAITA, M.; AYUGA, F.; AGUADO, P. (1996). “Kind of wall influence on silage material loads by the finite element method”. Vol. 1, p. 327

18) GUAITA, M.; AYUGA, F.; GARCÍA-VAQUERO, E. (1996). “Silage material parameters which determine lateral pressures obtained by the finite element method”. Vol. 1, p. 329

17) CABEZAL, L. M.; GARCÍA-VAQUERO, E.; AYUGA, F. FANJUL, M. J.(1996). “Typology and evolution of slaughterhouses in Galicia”. Vol. 1, p. 359

16) CAÑAS, I.; AYUGA, F.; ORTIZ, J. (1996). “Visual impact assessment for farm building projects”. Vol. 2, p. 1007.

 

III Congreso Internacional de Ingeniería de Proyectos. Barcelona. 12 a 14 de septiembre de 1996. Organiza AEIPRO. ISBN: 84-893-4966-5

15) GUAITA, M.; AYUGA, F., AGUADO, P. (1996). “Aplicación del método de los elementos finitos en la estimación de empujes estáticos sobre las paredes de los silos”. Vol. 4 pp. 1658-1666.

 

International seminar of the Second Technical Section of C.I.G.R.  New uses for old rural buildings in the context of landscape planning. Piacenza (Italia) . 20 a 21 de junio de 1996. Organiza CIGR.

14) AYUGA, F.; GARCIA, A. I. (1996). “Spanish flour factories of the early XXth century”. Vol. 1., pp. 2-8.

13) CABEZAL, L.M.; GARCIA-VAQUERO, E.; AYUGA, F.; FANJUL, M. J. (1996)“Typology of industrial construction in Galicia: the slaughterhouse”. Vol. 1., pp. 14-18.

 

XII World Congress and AgEng’94 Conference on Agricultural Engineering. Milán (Italia). 29 agosto a 1 septiembre de 1994. Organiza CIGR.

12) CAÑAS, I.; AYUGA, F. (1994) “Agricultural buildings and landscape. Colour evaluation”. Tomo 1, pp. 607-615.

11) TRUEBA, I.; DAL-RÉ, R.; GARCÍA, A. I.; AYUGA, F.; TRUEBA, E.; ESCRIVÁ, A. (1994). “Computer-aided model to optimize the design and the dimensions of reservoirs for agricultural use, based on the application of the earth and loose materials technology”

 

IV Jornadas Forestales de Cuenca. Cuenca. 19 a 21 de noviembre de 1992. Organiza UIMP.

10) AYUGA, F.; GARCÍA-VAQUERO, E. (1992) “Pasado presente y futuro de la construcción rural con madera”.

 

Seminario Internacional de la CIGR sobre estructuras para almacenamiento de granos, leguminosas y sus derivados. Rabat. 28 a 30 de noviembre de 1990. Organiza CIGR.

9) AYUGA, F. (1990) “Wall cost minimization in grain storage sheds”. Pp. 552-560

 

XI Congreso internacional de Ingeniería Rural. Dublín. 4 a 8 de septiembre de 1989. Organiza CIGR. ISBN: 9061919800

8) AYUGA, F. (1989) “Evolution of agricultural buildings in Spain. Its influence in rural landscape”. Tomo 2, pp. 1199-1205.

7) DAL-RÉ, R.; AYUGA, F. (1989)” New method to determinate monthly runoff in small basins”. Tomo 1, pp. 481-486.

6) TRUEBA, I.; DAL-RÉ, R.; GARCÍA, A. I.; AYUGA, F. (1989) ” Computer aided optimization of rural engineering project-size. Application to irrigation earth dams design”. Tomo 1, pp. 705-712.

 

XXI Congreso universitario UNIV-88. Madrid. (1988). ISBN: 84-404-3077-9

5) TRUEBA, I.; AYUGA, F.; DÍAZ Y DÍEZ DE ULZURRUN, M.; GONZÁLEZ, C. y

MARTÍNEZ FALERO, E. “La dignidad humana a la luz del desarrollo de la inteligencia artificial”. Pp. 219-224

 

IV Jornadas Nacionales de Madera en la Construcción. Madrid. 22 a 24 de noviembre de 1988. Organiza Confederación Nacional de la Construcción.

4) AYUGA, F.; ARRIAGA, F.; GARCÍA, J.(1988). “Pasado, presente y futuro de la madera en la construcción rural”

 

I Semana de la ingeniería asistida por ordenador TECNICAE 87. Madrid.(1987). Organiza UPM.

3) GARCÍA, A. I.; TRUEBA, I.; DAL-RÉ, R.; AYUGA, F. (1987). “Diseño óptimo de embalses de materiales sueltos para uso agrícola”.

 

VII Conferencia sobre Hidrología General y Aplicada. Zaragoza. 19 a 20 febrero de 1987. Organiza SMAGUA.

2) AYUGA, F.; GARCÍA, A. I. (1987). “Nuevo método para el cálculo simplificado de escorrentías en pequeñas cuencas no aforadas”. Pp. 149-156

 

XVIII Conferencia Internacional de Mecanización Agraria. Zaragoza 11 a 17 abril de 1986. Organiza ANIA.

1) JEVENOIS, J.; AYUGA, F. (1986) “Recomendaciones constructivas para tramos cortos de caminos en explotaciones hortofrutícolas”. Pp. 37-42.