Roig A, Lara-Bocanegra AJ, Majano-Majano A, Guaita M. (2021) Integrating design tools for elastic timber gridshells. World Conference on Timber Engineering (WCTE 2021), Santiago, Chile.

Roig A, Lara-Bocanegra AJ, Majano-Majano A, Guaita M. (2021) Integrating design tools for elastic timber gridshells. World Conference on Timber Engineering (WCTE 2021), Santiago, Chile.

Abstract The design of gridshells always requires an iterative process between architecture and engineering with accurate adjustment of different parameters from early stages, which causes a great deal of effort. This paper presents five parametrized generative algorithms developed in Grasshopper®

Gómez-Royuela JL, Majano-Majano A, Lara-Bocanegra AJ, Reynolds T. (2021) Determination of the elastic constants of thermally modified beech by ultrasound and static tests coupled with 3D digital image correlation. Construction and Building Materials, 302:124270.

Gómez-Royuela JL, Majano-Majano A, Lara-Bocanegra AJ, Reynolds T. (2021) Determination of the elastic constants of thermally modified beech by ultrasound and static tests coupled with 3D digital image correlation. Construction and Building Materials, 302:124270.

Abstract Fagus sylvatica L. (European beech) is one of the most widespread hardwood species growing in Europe, which is currently undergoing of in-depth research for the development of engineering products to use its excellent mechanical properties. As its natural durability

Majano-Majano A, Lara-Bocanegra AJ, Xavier J, Pereira F, Morais J. (2021) Direct evaluation of Mode I cohesive law of eucalyptus bonded joints. International Conference on Structural Integrity (ICSI), Funchal, Madeira, Portugal.

Majano-Majano A, Lara-Bocanegra AJ, Xavier J, Pereira F, Morais J. (2021) Direct evaluation of Mode I cohesive law of eucalyptus bonded joints. International Conference on Structural Integrity (ICSI), Funchal, Madeira, Portugal.

Abstract Eucalyptus globulus L. is a hardwood species with high mechanical properties and great potential for engineered timber products. In the development of glued laminated products using high density wood species such as eucalyptus, bonded joints (e.g. finger-joints) could be

Martínez-Criado C, Aira JR. (2021) CLT-concrete composite slab optimization. International Conference on Structural Integrity (ICSI), Funchal, Madeira, Portugal.

Martínez-Criado C, Aira JR. (2021) CLT-concrete composite slab optimization. International Conference on Structural Integrity (ICSI), Funchal, Madeira, Portugal.

Abstract The CLT-concrete slab solution contributes to notably improve several aspects where CLT shows some disadvantages related to its low stiffness or its low natural vibration frequency. This can affect the user’s comfort or even the structural integrity against resonance

Crespo Outes, J. (2021). Determination of mechanical and fracture properties in Eucalyptus globulus wood for numerical simulation analysis (PhD Thesis).

Crespo Outes, J. (2021). Determination of mechanical and fracture properties in Eucalyptus globulus wood for numerical simulation analysis (PhD Thesis).

Author: Crespo Outes, J. Supervisor: Guaita Fernández, M. & Majano-Majano, A. University: University of Santiago de Compostela, Lugo, Spain link (not available) Abstract In the regions of Atlantic influence of southern Europe, there is an extensive area of Eucalyptus globulus