AJL

Majano-Majano A, Gómez-Royuela JL, Lara-Bocanegra AJ. (2018) Elastic constants of thermally treated beech by ultrasound tests. World Conference on Timber Engineering (WCTE 2018), Seoul, Republic of Korea.

Abstract Thermal modification of wood is an environmentally friendly alternative to other preservative treatments which provides improvement in durability and dimensional stability. Heat treatments have been mainly applied to softwoods for non-structural uses. Considering the current abundance of hardwoods such

Lara-Bocanegra A, Majano-Majano A, Crespo J, Guaita M. (2018) Dispositivo para ensayos de relajación de tensiones a flexión en láminas de madera curvadas con radio constante (Test device for bending stress relaxation in curved timber laths under constant radius). Patent with examination. ES 2 649 543 A1.

Lara-Bocanegra AJ, Majano-Majano A, Crespo J, Guaita M. (2017) Finger-jointed Eucalyptus globulus with 1C-PUR adhesive for high performance engineered laminated products. Construction and Building Materials, 135:529-537.

Abstract Eucalyptus globulus is one of the hardwood species growing in Europe with the best mechanical properties and great natural durability. In high performance engineered laminated products, finger-joints play a key role. The aim of this research is developing high

Lara-Bocanegra A.J, Majano-Majano A, Guaita M. (2017) Stress relaxation on bending laths: review of test procedures and structural analysis approaches applied to timber gridshells. II Latin American Congress of Timber Structures + II Ibero-Latin American Congress of Timber in Construction (CLEM+CIMAD 2017), Buenos Aires, Argentina.

Abstract Timber gridshell structures get their shape by curving on site initially straight timber laths. This curving process produces stresses in the laths that can easily reach values close to the allowable ones. These initial bending stresses are partially reduced

Lara-Bocanegra AJ, Majano-Majano A, Ortiz J. Guaita M. (2017) Elastic gridshell prototype made of Eucalyptus globulus: construction and laboratory test. II Latin American Congress of Timber Structures + II Ibero-Latin American Congress of Timber in Construction (CLEM+CIMAD 2017), Buenos Aires, Argentina.

Abstract The necessary revision of the construction processes in search of more sustainable solutions leads to the use of high efficiency structural systems and environmen-friendly materials. In this sense, timber gridshells represent a solution of great interest for lightweight roofs

Lara-Bocanegra AJ, Majano-Majano A, Crespo J, Guaita M. (2017) Desarrollo de láminas reticulares postconformadas con madera de Eucalyptus globulus. Congreso de Ingeniería Rural, Madrid, Spain.

Abstract En este trabajo se presentan las investigaciones llevadas a cabo para el desarrollo de un primer prototipo de lámina reticular postconformada que será construida en el Campus de Lugo, de la Universidad de Santiago de Compostela. La geometría sigue

Lara-Bocanegra AJ, Majano-Majano A, Crespo J, Guaita M. (2016) Finger-joint performance in engineered laminated products made of Eucalyptus globulus. World Conference on Timber Engineering (WCTE 2016), Vienna, Austria.

Abstract The present research focus on the performance of finger-joints for the development of novel engineered laminated products made of Eucalyptus globulus using 1C-PUR adhesive type I suitable for outdoor use, taking the advantages of the high mechanical properties and

Lara-Bocanegra AJ, Roig A, Domínguez I, Perez de Lama J. (2014) Educational innovation in the architectural design of timber structures: an experience at the digital fabrication laboratory of Seville University. 7th International Conference of Education, Research and Innovation (ICERI), Sevilla, Spain.

Abstract This paper presents an educational experience developed in the course entitled “Architectural Design and Digital Fabrication of Timber Structures”, which was offered to students of the Higher Technical School of Architecture – University of Sevilla during the 2012-2013 academic

Lara-Bocanegra AJ, Roig A, Domínguez I, (2014) Innovation in Timber Architectural Structures and Digital Fabrication: A Cartography. The 10th International Fab Lab Conference, Barcelona, Spain.

Abstract After a relative decline during Modernism, the use of large-scale timber structures is becoming a growing trend at the beginning of the 21st Century. Different vectors converge to make this happen. The most relevant of these vectors being the

Lara-Bocanegra AJ, Roig A, Domínguez I. (2014) Estructuras de madera. Procesos de génesis. Hacia diseño computacional y la fabricación robotizada (Timber structures. Genesis processes. Towards the computational design and robotic manufacturing). In: Yes, We Are Open! Fabricación digital, tecnologías y cultura libres. ISBN: 978-84-941838-2-9. (In spanish).

Abstract Sí, estamos abiertos, a pesar de la crisis. También somos un equipamiento abierto a toda la comunidad universitaria y al público en general. En tercer lugar somos abiertos en cuanto al uso del conocimiento que aplicamos, transformamos y desarrollamos.