Saltar al contenido

Teaching & Students

CURRENT AND PAST STUDENTS

Current PhD students

M Arnabat-Martín: “Wall-Modeled Large Eddy Simulation of Non-Equilibrium Turbulent Boundary Layers with High-Order Methods”, ETSIAE-UPM, Start: 2026
A Ladron: “Machine Learning Models For Efficient Fatigue Life Prediction In Aircraft Design”, ETSIAE-UPM, Start: 2024
N Becerra:  “Physics informed neural networks in computational fluid dynamics” ETSIAE-UPM, Start: 2024
A Ballout: “Accelerated multiphase flows for high order solvers”, ETSIAE-UPM, Start:2024
D Huergo: “Reinforcement Learning for automation of high order simulations”, ETSIAE-UPM, Start:2023

PhD Alumni

[10] – S Shrestha (PhD): “Projection-Based High-Order Discretisations and Variational Multiscale Analysis”, ETSIAE-UPM, Start:2023 – End: 2026 (available here)
[9] – S Colombo (PhD): “A high-order immersed boundary method for curved geometries”, ETSIAE-UPM, Start:2021 – End: 2026 (available here)
[8] – K Tlales (PhD): “Accelerating Computational Fluid Dynamics with Unsupervised Learning-Based Mesh Adaptation”, ETSIAE-UPM, Start: 2020 – End: 2025 (available here)
[7] – A Amatriain (PhD): “Design, numerical simulation, and experimental testing of the cooling system of the ALICE Inner Tracking System 3”, ETSIAE-UPM and CERN, Start: 2021 – End: 2024 (available here
[6] – S Joshi (PhD): “Robust simulation of turbulent aerodynamic flows using high-order methods”, ETSIAE-UPM and NUMECA, Start: 2020 – End: 2023 (available here)
[5] – G Ntoukas (PhD): “Robust and adaptive high-order discontinuous Galerkin methods for Multiphase flows”, ETSIAE-UPM and NUMECA, Start: 2020 – End: 2023 (available here)
[4] – W Laskowski (PhD): “Efficient Solvers for Steady and Unsteady High-Order Compressible Flow Simulations”, ETSIAE-UPM and NUMECA, Start: 2019 – End: 2022 (available here)
[3] – J Manzanero (PhD): “A high-order discontinuous Galerkin multiphase flow solver for industrial applications”, ETSIAE-UPM, Start: 2015 – End: 2020 (available here)
[2] – M Chávez (PhD): “Analysis and optimization of multiple-relaxation lattice Boltzmann methods for under-resolved flow simulations”, ETSIAE-UPM, Start: 2014 – End: 2019 (available here)
[1] – C Redondo (PhD): “A fast IMPES multiphase flow solver in porous media for reservoir simulation”, ETSIAE-UPM and REPSOL, Start: 2014 – End: 2017 (available here)

Undergraduate and Master students

[16] – J Julian (Master’s thesis): “Compression of CFD Solutions Using Machine Learning: Application to Wind Turbines”, ETSIAE-UPM, Sept 2025
[15] – F Gutierrez (Master’s thesis): “Application of Deep Neural Networks for Pressure Coefficient Interpolation on Aerodynamic Surfaces”, uc3m, July 2025
[14] – M Arnabat (Master’s thesis): “AI-Based Generative Algorithms applied to the design of Blended Wing Body aircraft”, ETSIAE-UPM, March 2025
[13] – R Salado (Final degree Project): “Development of a Discontinuous Galerkin Spectral Element Method with Sliding Meshes for Wind Turbine Simulations”, ETSIAE-UPM, September 2024
[12] – A Ladrón (Master’s thesis): “Predicting Aircraft Fatigue Damage Using Machine Learning Techniques”, ETSIAE-UPM, July 2024
[11] – C Piqueras (Final degree Project): “Machine Learning-based Mesh Adaptation Sensor Design for CFD”, ETSIAE-UPM, July 2022
[10] – D Huergo (Master’s thesis): “High-order methods for the CFD simulations of hypersonic flows over a reentry capsule”, ETSIAE-UPM, July 2022 (Available here)
[9] – I Taravilla (Master’s thesis): “Estudio del Efecto de la Radiación sobre Partículas Suspendidas en un Fluido Transparente”, ETSIAE-UPM, February 2022
[8] – J González (Final Degree Project): “Predicción de pérdida de carga en tuberías multifásicas mediante técnicas CFD de alto orden”, ETSIAE-UPM, May 2021
[7] – N Conti (Master’s thesis): “
Resolución de ecuaciones diferenciales mediante redes neuronales”, ETSIAE-UPM, July 2020
[6] – A Amatriain (Master’s thesis): “Modelization and numerical simulation of thermal ablation treatments in heart arrythmias”, Universidad Complutense de Madrid, 2019 (Available here)
[5] – V Villagarcia (Final Degree Project):”Comparisons of high and low order solvers for aeronautics”, ETSIAE-UPM, Sept 2018
[4] – A Gomez (Final Degree Project): “Comparisons of high and low order solvers for turbulent flows”, ETSIAE-UPM, July 2018
[3] – A Amatriain (Final Degree Project):”Study of the bubble growth in a multicomponent mixtures at high pressures”, ETSIAE-UPM, September 2017
[2] – J Manzanero (Master’s thesis): “Dispersion-diffusion analysis for variable coefficient advection problems, with application to alternative DG formulations and under-resolved turbulence”, ETSIAE-UPM, June 2016
[1] – P Rivero (Final Degree Project): “Boundary layer stability”, ETSIAE-UPM, September 2016
 
 

TEACHING

2025-now: Associate Professor in Calculus II at ETSIAE-UPM: School of Aeronautics in Madrid (Spain)
2023-now: Associate Professor in Complementos de Matemáticas at ETSIAE-UPM: School of Aeronautics in Madrid (Spain)
2020-2023: Associate Professor in Vector Calculus at ETSIAE-UPM: School of Aeronautics in Madrid (Spain)
2015-2019: Assistant Lecturer in Calculus at ETSIAE-UPM: School of Aeronautics in Madrid (Spain)
2015-2019: Assistant Lecturer in Computer Science (Fortran) at ETSIAE-UPM: School of Aeronautics in Madrid (Spain)
(Calculus, Vector Calculus and Computer Science are first year compulsory undergraduate courses.)
2013-2015: Fortran laboratory (part of my PhD scholarship)

Gonzalo Rubio
Resumen de privacidad

Esta web utiliza cookies para que podamos ofrecerte la mejor experiencia de usuario posible. La información de las cookies se almacena en tu navegador y realiza funciones tales como reconocerte cuando vuelves a nuestra web o ayudar a nuestro equipo a comprender qué secciones de la web encuentras más interesantes y útiles.