Artículos en revistas del WoS/ Articles in WoS Journals

59) Madrid, M. A., Fuentes, J. M., Ayuga, F., Gallego, E. (2022). Determination of the Angle of Repose and Coefficient of Rolling Friction for Wood Pellets. Agronomy, 12 (2), 424

58) Sánchez-Crespo F.A., Marques da Silva J.R., Gómez-Villarino M.T., Gallego E., Fuentes J.M., García A.I., Ayuga F. (2021) Differential Interferometry over Sentinel-1 TopSAR Images as a Tool for Water and Tillage Soil Erosion Analysis. Agronomy. 11(10), 2075.

57) Gallego, E., Fuentes, J. M., Ruiz, A., Hernández-Rodrigo, G., Aguado, P., Ayuga, F. (2020). Determination of mechanical properties for wood pellets used in DEM simulations. International Agrophysics. 34(4): 485–494

56) Gallego E., Fuentes J.M., Wiącek J., Villar J. R., Ayuga F. (2019). DEM analysis of the flow and friction of spherical particles in steel silos with corrugated walls. Powder Technology, 355: 425-437

55) Gallego E., Fuentes J.M., Ramírez-Gómez Á., Ayuga F. (2018). Effects of different snow load arrangements on steel silo roof structures. Advances in Structural Engineering, 21 (16): 2507- 2517
doi.org/10.1177/1369433217742526

54) Gómez, J., Tascón, A., Ayuga, F. (2018). Systematic layout planning of wineries: the case of Rioja region (Spain). Journal of Agricultural Engineering, 49, (1): 34-41.
doi.org/10.4081/jae.2018.778

53) Bravo-Blanco, A., Sánchez-Medina, A., Ayuga, F. (2017). Analysis of the incipient motion of spherical particles in an open channel bed, using a coupled computational fluid dynamics–discrete element method model. Biosystems Engineering, 155: 68-76
doi: dx.doi.org/10.1016/j.biosystemseng.2016.12.003, IF- 2.132. Best Ranking Q1 (7/57). March 2017

52) García-Asensio J. M., Ayuga F. (2017). Irrigation engineering in Spain and how it has changed the country’s landscapes. European Countryside, 9 (1): 211-229. Enero 2017

51) Gallego, E., Moya, M., Ayuga-Téllez, E., García, A. I., Ayuga, F. (2016). The influence of management and construction methods in the repair costs of Spain’s low-volume road network. Journal of Agricultural Engineering, 47, (2): 118-126.
doi: 10.4081/jae.2016.537, April-June 2016

50) Fuentes J. M.; López-Sánchez M.; García A. I.; Ayuga F. (2015). Public abattoirs in Spain: History, construction characteristics and the possibility of their reuse. Journal of Cultural Heritage, 16 (5): 632-639.
doi: 10.1016/j.culher.2014.12.001. IF-1.533. Best Ranking Q3 (148/271).

49) Ayuga F. (2015). Present and future of the numerical methods in buildings and infrastructures areas of Biosystems engineering. Journal of Agricultural Engineering, 46 (1):1-12.
doi: 10.4081/jae.2015.436, January 2015

48) Díaz-Palacios-Sisternes S.; Ayuga F.; García A. I. (2014). A method for detecting and describing land use transformations: an examination of Madrid’s southern urban-rural gradient between 1990 and 2006. Cities, 40: 99-110.
doi: 10.1016/j.cities.2014.03.010, October 2014. IF-1.728. Best Ranking Q1 (5/39).

47) Ramírez-Gómez Á.; Gallego E.; Fuentes J. M.; González-Montellano C.; Porras-Prieto C. J.; Ayuga F. (2014). Full-scale tests to measure stresses and vertical displacements in an 18.34 m-diameter agricultural steel silo roof. Computers and Electronics in Agriculture, 106: 56-65
doi: 10.1016/j.compag.2014.05.008, August 2014. IF-1.761. Best Ranking Q1 (6/56).

46) Torreggiani D.; Benni S.; García A. I.; Ayuga F.; Tassinari P. (2014). Farm winery layout design: size analysis of base spatial units over an Italian study area. Transactions of the ASABE, 57(2): 625-633.
doi: 10.13031/trans.57.10267 March-April 2014. IF-0.895. Best Ranking Q3 (8/12).

45) Ramírez A., Gallego E., Fuentes J. M., González-Montellano C., Ayuga F. (2014). Values for particle-scale properties of biomass briquettes made from agroforestry residues. Particuology, 12 (1):100-106.
doi: 10.1016/j.partic.2013.05.007. IF-2.11. Best Ranking Q2 (41/135).

44) Moya M., Aguado P.J., Ayuga F. (2013). Mechanical properties of some granular agricultural materials used in silo design. International Agrophysics, 27 (2), 181-193
doi: 10.2478/v10247-012-0084-9. April-June 2013. IF-1.142. Best Ranking Q2 (33/78).

43) Vicente-Guillén J., Ayuga-Telléz E., Otero D., Chávez J. L., Ayuga F., García A.I. (2012). Performance of a Monthly Streamflow Prediction Model for Ungauged Watersheds in Spain. Water Resources Management, 26(13): 3767-3784
doi: 10.1007/s11269-012-0102-5. October 2012. IF- 2.259. Best Ranking Q1 (10/122).

42) González-Montellano C., Fuentes J. M., Ayuga-Téllez E., Ayuga F. (2012). Determination of the mechanical properties of maize grains and olives required for use in DEM simulations. Journal of Food Engineering, 111(4): 553-562
doi: 10.1016/j.jfoodeng.2012.03.017. August 2012. IF- 2.276. Best Ranking Q1 (29/133).

41) Ares, R., Fuentes J. M., Gallego E., Ayuga F., García A.I. (2012). Use of the Labour-Intensive Method in the Repair of a Rural Road Serving an Indigenous Community in Jocotán (Guatemala). Science and Engineering Ethics, 18(2): 315-338
doi: 10.1007/s11948-011-9290-2. June 2012. IF- 0.901. Best Ranking Q1 (10/58).

40) González-Montellano C., Gallego E., Ramírez A., Ayuga F. (2012). Three dimensional discrete element models for simulating the filling and emptying of silos: analysis of numerical results. Computers & Chemical Engineering, 40: 22-32
doi: 10.1016/j.compchemeng.2012.02.007. May 2012. IF- 2.091. Best Ranking Q1 (32/133).

39) González-Montellano C., Ramírez A., Fuentes J. M., Ayuga F. (2012). Numerical effects derived from en masse filling of agricultural silos in DEM simulations. Computers and Electronics in Agriculture, 81(1):113-123
doi: 10.1016/j.compag.2011.11.013. February 2012. IF- 1.766. Best Ranking Q1 (6/57).

38) Gallego E., Fuentes J. M., Ramírez A., Ayuga F. (2011). Computer simulation of complex-shaped formworks using three-dimensional numerical models. Automation in Construction, 20(7): 830-836
doi:10.1016/j.autcon.2011.03.001. November 2011. IF- 1.500. Best Ranking Q1 (19/118).

37) González-Montellano C., Ramírez A., Gallego E., Ayuga F. (2011). Validation and experimental calibration of 3D discrete element models for the simulation of the discharge flow in silo. Chemical Engineering Science, 66(21): 5116-5126.
doi:10.1016/j.ces.2011.07.009. November 2011. IF- 2.431. Best Ranking Q1 (26/133).

36) Moya M.; Gallego E.; García A.I.; Ayuga F. (2011). A proposed methodology for the management of low-volume roads in Spain. The Baltic Journal of Road and Bridge Engineering, 6(3): 153-162
doi: 10.3846/bjrbe.2011.20. September 2011. IF- 1.610. Best Ranking Q1 (16/118).

35) Gallego E., González-Montellano C., Ramírez A., Ayuga F. (2011). A simplified analytical procedure for assessing the worst patch load location on circular steel silos with corrugated walls. Engineering Structures, 33(6): 1940-1954
doi: 10.1016/j.engstruct.2011.02.032. June 2011. IF- 1.351. Best Ranking Q1 (22/118).

34) Fuentes J. M., García A.I., Ayuga E., Ayuga F. (2011). The development of the flour-milling industry in Spain: analysis of its historical evolution and architectural legacy. Journal of Historical Geography, 37(2): 232-241
doi:10.1016/j.jhg.2010.10.002. April 2011. IF- 0.817. Best Ranking Q1 (3/31).

33) González-Montellano C., Ayuga F., Ooi J. Y. (2011). Discrete element modeling of grain flow in a planar silo: influence of simulation parameters. Granular matter, 13(2): 149-158
doi: 10.1007/s10035-010-0204-9. April 2011. IF- 1.755. Best Ranking Q1 (27/132).

32) Gallego E., Fuentes J. M., Ramírez A., Ayuga F. (2010). Design of tall formworks by a Finite Element Model. Journal of Construction Engineering and Management, 136 (7): 803-810
doi:10.1061/(ASCE)CO.1943-7862.0000177. Julio 2010. IF- 0.676. Best Ranking Q2 (20/53).

31) Ramírez A., Nielsen J., Ayuga F. (2010). Pressure Measurements in Steel Silos with Eccentric Hoppers. Powder Technology, 201 (1): 7-20
doi:10.1016/j.powtec.2010.02.027. Julio 2010. IF- 1.887. Best Ranking Q2 (35/134).

30) Fuentes J. M., Gallego E., García A.I.; Ayuga F. (2010). New uses for old traditional farm buildings: The case of the underground wine cellars in Spain. Land Use Policy, 27 (3): 738-748
doi:10.1016/j.landusepol.2009.10.002. Julio 2010. IF- 2.070. Best Ranking Q1 (12/78).

29) Gallego E., Rombach G. A., Neumann F., Ayuga F. (2010). Simulations of Granular Flow in Silos with Different Finite Element Programs: ANSYS vs. SILO. Transactions of the ASABE, 53(3): 819-829
Mayo-junio 2010. IF- 0.822. Best Ranking Q3 (8/12).

28) Ayuga F., Briassoulis D., Aguado P., Farkas I., Griepentrog H., Lorencowicz E. (2010). Third cycle university studies in Europe in the field of Agricultural Engineering and in the emerging discipline of Biosystems Engineering. Communications in Agricultural and Applied Biological Sciences, 75(1): 209-231.

27) Ramírez A., Nielsen J., Ayuga F. (2010). On the use of plate-type normal pressure cells in silos: Part 2: Validation for pressure measurements. Computers and Electronics in Agriculture 71 (1): 64-70
doi:10.1016/j.compag.2009.12.005. Abril 2010. IF- 1.431. Best Ranking Q1 (7/55).

26) Ramírez A., Nielsen J., Ayuga F. (2010). On the use of plate-type normal pressure cells in silos: Part 1: Calibration and evaluation. Computers and Electronics in Agriculture 71 (1): 71-76
doi:10.1016/j.compag.2009.12.004. Abril 2010. IF- 1.431. Best Ranking Q1 (7/55).

25) Ramírez A., Moya M., Ayuga F. (2009). Determination of the mechanical properties of powdered agricultural products and sugar. Particle & Particle Systems Characterization, 26 (4): 220-230
Diciembre 2009. IF- 0.465. Best Ranking Q3 (20/30).

24) González-Montellano C., Ramírez A., Gallego E., Ayuga F. (2009). On the steel cost of circular flat-bottomed silos designed using the Eurocodes. Structural Engineering and Mechanics, 33 (5): 561-572
Noviembre 2009. IF- 0.438. Best Ranking Q3 (72/106).

23) Cañas I.; Ayuga E.; Ayuga F. (2009). A contribution to the assessment of scenic quality of landscapes based on preferences expressed by the public. Land Use Policy, 26 (4): 1173-1181.
doi:10.1016/j.landusepol.2009.02.007 Octubre 2009. IF- 2.355. Best Ranking Q1 (7/66).

22) Gallego E.; Moya M.; Piniés M.; Ayuga F. (2008). Valuation of low volume roads in Spain. Part 2: Methodology validation. Biosystems Engineering 101 (1): 135-142
doi:10.1016/j.biosystemseng.2008.06.010 Septiembre 2008. IF- 0.917. Best Ranking Q3 (6/9).

21) Gallego E.; Moya M.; García A.I.; Ayuga F. (2008). Valuation of low volume roads in Spain. Part 1: Methodology development. Biosystems Engineering 101 (1): 123-134
doi:10.1016/j.biosystemseng.2008.06.009. Septiembre 2008. IF- 0.917. Best Ranking Q3 (6/9).

20) Vidal P.; Gallego E.; Guaita M.; Ayuga F. (2008). Finite element analysis under different boundary conditions of the filling of cylindrical steel silos having an eccentric hopper. Journal of Constructional Steel Research. 64 (4): 480-492
doi:10.1016/j.jcsr.2007.08.005 Abril 2008. IF- 0.841. Best Ranking Q2 (11/38).

19) García, A. I.; Ayuga F. (2007). Reuse of abandoned buildings and the rural landscape: The situation in Spain. Transactions of the ASABE 50 (4): 1383-1394.
Julio-agosto 2007. IF-1.042. Best Ranking Q3 (6/9).

18) Gallego E., Fuentes J. M., Ramírez A., Navamuel B., Ayuga F. (2007). Cálculo de encofrados de gran altura mediante un modelo de elementos finitos: estudio paramétrico. Informes de la Construcción. 59 (505): 73-81.
Enero-marzo 2007.

17) Vidal P.; Gallego E.; Guaita M.; Ayuga F. (2006). Simulation of the Filling Pressures of Cylindrical Steel Silos with Concentric and Eccentric Hoppers Using 3-Dimensional Finite Element Models. Transactions of the ASABE. 49 (6): 1881-1895.
Noviembre-diciembre 2006. IF-0.637. Best Ranking Q4 (8/9).

16) Juan, A.; Moran J. M.; Guerra, M. I.; Couto, A.; Ayuga, F.; Aguado P. J. (2006). Establishing stress state of cylindrical metal silos using finite element method: Comparison with ENV 1993. Thin-Walled Structures 44 (11): 1192–1200.
Noviembre de 2006. IF- 0.694. Best Ranking Q2 (25/83).

15) Vidal P.; Couto A.; Ayuga F.; Guaita M. (2006). Influence of hopper eccentricity on discharge of cylindrical mass flow silos with rigid walls. Journal of Engineering Mechanics. ASCE. 132 (9): 1026-1033.
Septiembre de 2006. IF-0.965. Best Ranking Q1 (24/106).

14) Moya, M.; Guaita, M.; Aguado, P.; Ayuga F. (2006). Mechanical Properties of Granular Agricultural Materials, Part 2. Transactions of the ASABE, 49 (2): 479-489.
Marzo –abril 2006. IF-0.637. Best Ranking Q4 (8/9).

13) García, L.; Hernández, J.; Ayuga, F. (2006). Analysis of the materials and exterior texture of agro-industrial buildings: a photo-analytical approach to landscape integration. Landscape and Urban Planning, 74 (2): 110-124.
Enero 2006. IF- 2.029. Best Ranking Q1 (7/31).

12) Vidal, P.; Guaita, M.; Ayuga, F. (2005). Discharge from cylindrical slender steel silos: finite element simulation and comparison with Eurocode 1. Transactions of the ASAE. 48 (6): 2315-2321.
Noviembre –diciembre 2005. IF-0.664. Best Ranking Q4 (8/9).

11) Moran, J. M.; Juan, A.; Ayuga, F.; Robles, R.; Aguado P. (2005). Analysis of thermal load calculations in steel silos: a comparison of eurocode 1, classical methods, and finite element methods. Transactions of the ASAE, 48 (4): 1483-1490.
Julio-agosto 2005. IF-0.664. Best Ranking Q4 (8/9).

10) Vidal, P.; Guaita, M.; Ayuga, F. (2005). Analysis of Dynamic Discharge Pressures in Cylindrical Slender Silos with a Flat Bottom or with a Hopper: Comparison with Eurocode. Biosystems Engineering, 91(3): 335-348.
doi: 10.1016/j.biosystemseng.2005.03.012. Julio 2005. IF-0.848. Best Ranking Q3 (5/9).

9) Hernández-Blanco, J.; García-Moruno, L.; Ayuga, F. (2004). Integration methodologies for visual impact assessment of rural buildings by geographic information systems. Biosystems Engineering, 88 (2): 255-263.
doi:10.1016/j.biosystemseng.2004.02.008. Junio 2004. IF-0.496. Best Ranking Q4 (8/9).

8) Hernández-Blanco, J.; García-Moruno, L.; Ayuga, F. (2004). Assessment of the visual impact made on the landscape by new buildings: a methodology for site selection. Landscape and Urban Planning, 68 (1): 15-28.
Abril de 2004. IF-1.204. Best Ranking Q3 (55/107).

7) García, L.; Hernández, J.; Ayuga, F. (2003). Analysis of the exterior colour of agroindustrial buildings: a computer aided approach to landscape integration. Journal of Environmental Management, 69 (1): 93-104.
Septiembre de 2003. IF-0.624. Best Ranking Q3 (89/131).

6) Guaita M.; Couto, A.; Ayuga F. (2003). Numerical Simulation of Wall Pressure during Discharge of Granular Material from Cylindrical Silos with Eccentric Hoppers. Biosystems Engineering, 85 (1): 101–109.
doi:10.1016/S1537-5110(03)00037-0. Mayo 2003. IF-0.299. Best Ranking Q4 (9/10).

5) Hernández, J.; García, L.; Morán, J.;. Juan, A; Ayuga, F. (2003). Estimating visual perception of rural landscapes using GIS: the influence of vegetation. Journal of Food, Agriculture and Environment, 1 (1): 139-141. Enero 2003. IF-0.232

4) Martínez, V.; García, A. I. ; Ayuga F. (2002). Distributed routing techniques developed on GIS for generating synthetic unit hydrographs. Transactions of the ASAE, 45 (6): 1825-1834.
Noviembre –diciembre 2002, IF-0.454. Best Ranking Q3 (6/10).

3) Moya, M.; Ayuga, F.; Guaita, M. ; Aguado, P. (2002). Mechanical Properties of Granular Agricultural Materials. Transactions of the ASAE, 45 (5): 1569–1577.
Septiembre-octubre 2002. IF-0.454. Best Ranking Q3 (6/10).

2) Ayuga, F.; Guaita, M.; Aguado, P.; Couto, A. (2001). Discharge and the Eccentricity of the Hopper Influence on the Silo Wall Pressures. Journal of Engineering Mechanics. ASCE. 127 (10): 1067-1074.
Special Issue. Octubre de 2001. IF-0.710. Best Ranking Q2 (31/102).

1) Ayuga, F.; Guaita, M.; Aguado, P. (2001). Static and Dynamic Silo Loads using Finite Element Models. Journal of Agricultural Engineering Research, 78 (3): 299-308.
Marzo 2001. IF-0.452. Best Ranking Q2 (5/10).